91 olds cutlass roller,BAE hemi,Bruno lenco

Discussion in 'Noonan Classifieds' started by lvmsracer, Oct 17, 2018.

  1. lvmsracer

    lvmsracer Member

    Joined:
    Feb 21, 2011
    Messages:
    65
    Likes Received:
    0
    1991 Oldsmobile Cutlass Steel Roof and quaters.TMRC built (Tommy Mauney Race Cars) Double frame rail 6.0 cert. Lamb struts, Lamb Brakes, Weld spindle mount wheels, Weld 16x16 double beadlocks 34.5x17-16 Hoosier tires, Mark Williams aluminum modular 9” rear end with full floater hubs, M/W alumn bolt through 3rd member,5.0 pro gear, 40 spline axels ,Santhuff Adjustable coilovers, Pro mod Anti roll bar, wishbone track locator, M/W drive shaft and yoke for Lenco , front and mid engine plates for BAE hemi, set up for Lenco drive trans, Pro Mod wheele bars and net, dual Simpson cross-form chutes, Carbon fiber front end,doors,trunk,rear bumper, spare doors and hood, fire bottle system, dedenbear delay box,MSD grid , 24volt batteries and charger, racepak V300 with driveshaft sensor,cartridge,lic stick, two sets of zoomie headers. Will fit big driver weights 2700lbs with 6-2” 250lbs driver .Car has been fast and proven. Hooks on a dirt road. $30K firm


    451ci BAE hemi, .100 tall BAE block no windows never been welded on,Bryant crank, GRP rods, JE pistons, Crane cam, BAE morale lifters, BAE 6 heads, pac springs, Manton rocker assembly, manton push rods, RCD gear drive, RCD P&P oil pump,moroso oil pan,Taylor engine blanket, RCD mag drive, BAE mag valvecovers, BAE mag intake, MSD 44 mag,msd points box and transformer,reactor flexplate, 3 new starters,spare lifters,spare spark plug wires,spare spark plug tubes,TOOLs on head spring checker and removal,lots of spares,RCD blower starter,spare gaskets ,Motor is Fresh.PSI 1471 roots blower High Helix modifed by Rob Atchinson,Carbonfiber low profile injector,Waterman fuel pump tuned by Bob Newberry, Made 51psi at 32% and 60psi at 44%, motor has been very fast. $42K OBO may separate blower from motor. Have converters and trans available

    Fresh Big shaft Bruno with all updates 3speed CS2 lenco with air pods,shifter,taylor blanket,spare gear sets,3 specrite converters $9800
     
    #1
  2. lvmsracer

    lvmsracer Member

    Joined:
    Feb 21, 2011
    Messages:
    65
    Likes Received:
    0
    #2
  3. lvmsracer

    lvmsracer Member

    Joined:
    Feb 21, 2011
    Messages:
    65
    Likes Received:
    0
    Bump. Possibly separate motor and blower
     
    #3
  4. lvmsracer

    lvmsracer Member

    Joined:
    Feb 21, 2011
    Messages:
    65
    Likes Received:
    0
  5. lvmsracer

    lvmsracer Member

    Joined:
    Feb 21, 2011
    Messages:
    65
    Likes Received:
    0
    Olds Cutlass Sale Pending
     
    #5

Share This Page