Separate names with a comma.
I believe Summit's web site can tell you if there are any size different. The info should be under the slick brand and size. After clicking on...
Hi Ray ARP will make you anything you want.
a lot of people will clearance the back side of the pulley next to the timing wheel. Especially if running a magnetic pickup, as to be able to...
Any new info on the issue you have been having? Did you get your problem solved?
Haven't heard of GRP's needing retorqued between rounds. At least in Hemi's running mid to upper 6's. First choice would be R&R or CP rods.
Could your fuel be moving forward away from the pickup in the tank at shut down? That would cause a lean condition for sure. I could be wrong but...
Plus all the added "safety rules" and equipment, that have been added to most of the upper classes. Just that in its self has added huge costs to...
You should always be checking for broken springs. If you are running older hemi heads, you need to be checking to make sure you haven't burnt or...
Yes. I still haven't purchased one yet. Do you have an extra? :)
I'm not familiar with them
Hi Mr. Hanna! Yes sir it is a 511" HEMI. A bit old school. Dart 96 heads. Stage 10 KB block. Non of the guys in this group spin their motors...
Do you like your grid setup? I am going to run the MSD coil near plug deal. MSD 600 pro I believe. I think I have to run a Grid with it. Do data...
Yes I can use a trans brake. Just can't be on the two step or air launcher. With a 4.30 gear and 34.5x17x16 slicks ( if my math is correct ) and...
Yes sir. We don't have to spin them hard. It is an index class. Both leave on green. First one to the finish line wins. As long as we go 6.70...
We can't use ant type of a launch/throttle control. Timing controller is debatable.
