Needing Help With Rodeck Block

hi does anybody know the torque specs for an older tall deck rodeck block serial number 539. solid block but tall deck need specs for heads torque 1/2 stud and specs for torquing of the mains thx wally 4 bolt mains and side bolts too.

 

http://aafd-inc.com/Rodeck.shtml

You can E-mail John Rodeck from that page.

Or you can call him:

http://www.processregister.com/Rodeck_Aluminum_Blocks_Inc/Supplier/sid36034.htm

 

rodeck

thx bill will do.

 

Rodeck

I wondeer if John,can HOOK Me up with a set of Head Studs?I have been Waitng for a Guy on here that says He has them,but Him having them>Dont Help me?
Later
G

 

When I called him about a month ago, John told me he had some in stock ?
He just needed to know lengths ????

 

Do you need the head studs for Chevy heads I think we have a set that we took out when we when to Big Duke heads

Lanny

 

rodeck

hi i need head stud nuts for 1/2 stud 12 point. or a complete used head stud 1/2 set for rodeck let me know thx

 

Rodeck 1/2" Head Studs

I have an extra set of RODECK 481T 10.200 1/2" head studs. They work with Brodix heads. Should also have an extra set of the 1/2" 12-pt nuts.

 

rodeck parts

thx please email me.Wanted Big Block Chevy Parts

--------------------------------------------------------------------------------

hi does anybody have parts sitting on the shelf they like to get rid of. need rodeck 1/2 12 point heads stud nuts or will consider if price is reasonable complete stud kit. crower rockers, studle girdle, rocker studs and guide plates for 7/16 rockers. alky pump for injection non blown,crank trigger ignition set up, tall valve covers for dart heads, rings for 4.530 bore, oil pump, push rods for tall deck rodeck with dart heads, tall deck distribuator mag or msd. thx email mopar436@mts.net with prices please take care

 

I need head studs and nuts for a 481T Rodeck as well... PM me or e-mail me at mx278@metrocast.net if you have them.

I also need some pushrods for dart 360's and the 10.2 rodeck block, and I need an oil pump drive for the same setup.

 

We need to know how long of push rods. seems evey time we change cams we have to get new ones


Lanny

 

rodeck parts

06-06-2008, 07:21 PM
dragboat316
Super Comp Join Date: Jan 2007
Posts: 24

Rodeck 1/2" Head Studs

--------------------------------------------------------------------------------

I have an extra set of RODECK 481T 10.200 1/2" head studs. They work with Brodix heads. Should also have an extra set of the 1/2" 12-pt nuts.

please email me at mopar436@mts.net eh! ps thx larry hoeks racing will get back to you

 

rodeck parts

06-06-2008, 07:21 PM
dragboat316
Super Comp Join Date: Jan 2007
Posts: 24

Rodeck 1/2" Head Studs

--------------------------------------------------------------------------------

I have an extra set of RODECK 481T 10.200 1/2" head studs. They work with Brodix heads. Should also have an extra set of the 1/2" 12-pt nuts.

please email me at mopar436@mts.net eh! ps thx larry hoaks racing will get back to you

 

computer crashed

thx for all the replys guys, but can you reply to me directly again. sorry son had crashed my computer and all infor was wiped out. thx