AJPE 5300 HEMI

I have for sale an AJ 5300 HEMI

This engine is a 5.3 bore space hemi.
I'm selling it complete from manifold to pan,
fresh and ready to run. Pistons/rings/pins/rods
have zero runs. Crank has 4 runs. Engine has no
windows or saddles.

Components include:
Hogans sheetmetal intake
Manton/Jesel/AJPE rocker assy.
Wiseco pistons
Total seal rings
GRP rods
Bryant crank
P&P wet sump oil pump
all oil lines & filter

With the 5.3 bore space there's room for a larger than normal bore(for a blown motor) with sleeve thickness much more than a typical 4.8 setup. The bore is 4.750. This also allows for larger valves w/ enough seat material to not move around. Valve sizes are 2.650 Int and 2.020 exh.

It comes w/ 2 rotating assy's(pistons/rods/crank). One prodices 532 cu/in(4.750x3.750) while the other produces 588 cu/in(4.750x4.150)
.
Both are low run cranks, both have new GRP rods.

As assembled right now it has the 588 stuff in it. It's been 3.70's & 210 mph @ 2350 lbs in it's current configuration in our Lowmad.

I will sell the complete engine with the extra rotating assy as well as some other needed spare parts for $40k.

I'll be somewhat out of pocket for the next cpl of weeks so it's best to reach me on my cell.

Thanks,
Bo Huddleston
615 476 2813

Also, I *might* take a 6 headed or better Brad motor in on trade. Not interested in anything else.