Separate names with a comma.
blowing oil it does have a tray
I have a friend that has a 540 short deck bbc bow tie block. it is one of the original ones over 15 years old and has always had a blow by...
center support I have seen pics on blowers that did not have the cross bar I can add it to the adapter and bolt it down where the support was and...
dmpe I don't want to infringe on his Ideas. I have the hat and need to make it work.thanks Craig:confused: Mike thanks for the ##
acceleration enterprises how can I contact him
Has anyone worked with one of these hats? I have heard they have internal air flow problems. I am going to build a adapter from the small opening...
I am building a adapter for a big and ugly Enderly hat small opening to a large opening 1471 I want to build a divider to keep the rotors from...
temps 150 ft a torch wouldn't burn trough that fast 1/8 thick should do it just dont know about the thermal expansion at those temps they may...
boat racer are you related to Jimmie the boat racer
2 lobe think about it like this there is more space to pack the air all of the old stuff was not twisted they are running them on several...
2 lobe the old ones did not have the twist
size bigger is better but I bet they will work
Has anyone heard about the 2 lobe 60deg twist blowers they say they are the shit an 8 they say puts out like a 14 with lower temps I think they...
thread chaser I bought a chaser that looks like a concrete anchor with threads you put it in the hole and snug it up and find the good threads...
check valve good luck on the cheap stuff spud miller sells a kit that works I bought 2 one for fuel psi and boost if I have forgot to clear mine...
temp you bet it cools it down at least 40 deg
no fire check to see if the pin in the connector is pushing out and not making a good connection I read somewhere that is a problem w/ msd stuff...
intake temp I have not measured it yet lacking the funding for a data log.I have a egt logger this is in a lake/race boat less is more on...
I have a littlefield HH delta bottom billet rotor fully stripped less teflon rotor lobe plugs. In you're opinion at what overdrive would be the...
www.fuelinjectionenterprises.com Spud is the man and gives you a lot of info and sends back the old parts I have had my mag worked on and bought...
