Separate names with a comma.
I have a dart big m bbc. What would you say would be the max bore size? And still have enough meat between the cylinders to keep the head gaskets...
Thanks guys big help
Can sleeves be bought or other types modified?:confused: I was told kb is out of business :eek: thanks Craig
Fuel injection enterprises (spud miller) YOU WILL NOT GO WRONG HE WILL GIVE YOU SOOO MUCH INFO ABOVE AND BEYOND WHAT YOU NEED!! FOR A GREAT...
What should the fuel psi be at the ports if running 40 psi boost I figured there is a split ratio or the mixture could be lean.( new to high boost...
I have a 12.5:1 468 bbc 14:71 hh delta bottom. I am changing from 40%to 52%od crank rpm 7500-7600 how much hp/torque would this gain if the afr is...
timing I have ran 35 on a bbc 25 psi no prob from what I have seen and heard by the time it fires the plug it would be like 30- 32. Now a pro...
Thanks mike:d
How much HP is needed to run a 14-71 HH retro 52% over 38 - 40 psi I was thinking 350 ?? Just a guess :confused:
Everything I have been told is no more than 13000 rpm the end of good air would more than likely be 12000 rpm call jr @ rbs...
Wipe it out with liquid wrench and finish it off with oil if it is a small amount of rust works great on surface rust
flow Try spud at fuel injection enterprises easy to talk to and well priced http://www.fuelinjectionenterprises.com/
I totally agree well put!!:cool The diesel they originated from made very little boost if any. Their main purpose was to scavenge the exhaust out...
belt longer belt so you can run a larger bottom wheel .The psi likes od from what I have been told
Od RBS SUPERCHARGER THEY WILL SEND YOU ONE 530-292-3040 OR 530-292-3368 JR OR ROBIN WILL HELP YOU OUT !!:cool:
valves How much boost?? I just found out I had stretched valves due to lack of seat psi under 38 psi they were bouncing.Thank god we found it...
load cel I have seen them on wings and bars. In tire shake the logger would flutter at a low psi on both I would bet.
boost I have been told that if its a billet rotor it can be turned up to 13000 rpm before it goes flat and makes too much heat. I have an old...
springs I called Oddy's and they said a min of 360# on the seat. Stupid me when I bought the cam I wasn't running but 25 psi boost. I thought I...
seat psi The seat psi is 290# we are tearing up lifters now we were tearing up lifters and rockers. Switched to T&D shaft and now only tearing up...
