Separate names with a comma.
Check out the Simpson Ch3nO2, seems to be the best available now. If you're feeling spendy the Bell HP3 Carbon SAH2010 was designed for max...
You're installed height is going to be based solely on the camshaft and the spring used. Make sure your valve isn't something ridiculously tall...
You could mount the two 12v batteries where you need the weight and that way they're on the car. We had the same rule but just decided to chance...
Either keep the 16v battery on board or get a smaller battery to run electronics, make sure you have enough for the amps the TB draws. Put a...
You can really get them from just about any header manufacturer...Hedman, Smiley, TEK, Dan Olson, Triple T. Brandon Booher NHRA TAD #34
www.fullborerace.com Brandon Booher NHRA TAD #34
Remind me what low e.t. was.... half a tenth quicker than the quickest blower car....ok just checking. Brandon Booher NHRA TAD #34
It's the DMPE MK11 and DMPE Axial Insert Plate. They took it off in eliminations I believe. This setup is also used by Jim Whiteley, Paul Gill,...
No Duane? *Ahh finals from Valdosta.... Brandon Booher NHRA TAD #34
I was thinking the same thing Will, I didn't believe the Jesel Rocerks were even available/out yet. Here's a link to a modeled version of the...
From what I understand the Jesel setup will cost around $11k complete. When I spoke to Jesel about switching to their setup you needed to send...
Asterik next to my name as I'm arguing for their legality as it pertains to my combination. As far as drivers cutting lights, almost every BAD...
Ti bars are known for cracking, many of the Top Fuel teams use them however = deep pockets! If I was going to have an ultra lightweight bar setup...
Is it needed, no. Does it provide consistency to a setup that cannot raise rpm prior to staging, yes. As I said before we don't leave at a wide...
I have used the 2 step in this setup for the last year and am stating facts from my own experience and my setup. For the record I have not left...
Yes in fact I can, R&R Rods using a 2 Step; we cycle rods every 15 passes. Perhaps they last until 20, I don't know. The starting line RPM/Pedal...
What does one have to do with the other, I have no comment on the Rd. 1 situation @ Pomona because I wasn't there. What I did see is he didn't...
Bill raises a good point here and yes they can test but do they look? A tell tale sign would be a 2nd DS sensor but I'm sure there are better...
You will hurt parts no worse with a 2 Step than you will without it, proven fact. You limit your RPM's by intentionally misfiring cylinders to...
Nobody has an "automatic" transmission, I still have to have my car leave the line at the correct rpm, I still have to shift, a converter car is...
