Separate names with a comma.
post your cam specs for BB chevy and convetional heads. would like to see what everyone is running.
i made the first hits today and my EGT's are reading high, in the 1350-1400 range, but the plugs only show 1/2 the cadium discolored on the face...
I have a brand new GT belt that is fraying small white shavings (almost dust-like) that are blowing all over the motor. It seems to be coming...
how many of you run a filter in your fuel system on blown alky, and where do you install the filter?
is there anything wrong with turning the pulley around with the open end towards the front?
where is the best place to get a set back plate for a BBC manifold. I want to set the blower back about 6-7" Thanks
can someone tell me what the difference in a b rotor, f rotor, etc is. I am interested in info for a SSI supercharger. I am looking to be using...
Enderle 600 pump to 110, gears only? since I have a new 600 (9.2 gpm) pump and need more fuel for injection, can I just replace the gears since...
we just started our new motor and tried to pull it on the dyno. 565 chevy, Dart conventional heads (410cc), 10:1 compression, 114 lobe cam...
how many of you run a vacuum pump on a roots blower? I would like to see how you have the pump and drive mounted. Anyone can share their...
just looking for some info on what makes a blower a retro blower what makes one a high helix what does the pie shaped opening / front...
is it better to get the biggest intake runner size you can on a rots blown application. thinking a 360cc conventional head vs a 420cc head. this...
has anyone run them on a blower and what is the largest size blower you can run with them. I have (2) 1200 cfm alky carbs. been injection and...
I currently run a 540 BBC, conventional heads and 12.4:1 compression, 8-71 HELIX Kobelco i have NGK 5671A-9 plugs (pretty sure of the number)....
at what point with blown alky do you need to go to a mag. How far can you go with a MSD 7AL-3
have any of you made the change from headers to zoomies? what changes did you see in performance and tuning. 540 BB chevy, Brodix conventional...
i have a Kobelco blower that started leaking oil out from the top pulley. I am going to pull it off and check. Any ideas as to what is leaking,...
I have a Kobelco 8-71 Superman and need to know the cubic inches per revolution. Can anyone help me with that? thanks
I am doing blown alky for the first time. 540 BBC with conventional heads, 8-71 Superman blower, about 20-30% overdrive. What plugs do you guys...
I have a 481T block. Does anyone have a website for them? What do you torque the mains to?
