Separate names with a comma.
Several guys were asking me about a baseline tuneup. This went 4.0@183@2650lbs and has been safe. 540 14 degree chevy with indy manifold and...
Trying to blip the timing at the shift. We installed an airswitch on the lenco pod powering the step 2 wire. When it shifts it holds the timing...
what do you guys use for a pneumatic switch to tell the computer when the lenco shifts? I see RJ racecars has one for 44.00. Thanks
Is Mike Dunn that builds mag drives out of business? The number I have is disconnected. thanks ITA
I'm running a BBC promag 44 and titan pump with a Dunn offfset drive. I was assured this setup would not overload the bronze gear by several...
Anybody have experience with Profiler or Raptor 12 degree heads for a max effort screwblown app? I talked to Reher Morrison and they said the...
We have a chevy with a D rotor psi @100% and automatic. Launching with 4100rpm on the 2 step and blades set to 23psi the car intermittently drops...
I'm installing a 4 stage management block on a screw fuel system. One stage will be for the 2 step and the others will work downtrack. My...
Anybody found a good/cheap pump for building a transmission cooler setup for between rounds?I'd prefer 110volt. We've been racing in 110 degree...
Im running an auto convertor car with soft timing downtrack but hitting it pretty hard on the start due to a poor track. It started showing some...
We have a d rotor big chief chevy at 100% with converter. Launching on 2 step with air throttle limiting boost. 4100 rpm 16lbs of boost it works...
Looking for a reference. Thanks, Mike
We have a 2650lb promod with a screwblown automatic. Will a small pinion gear set live at ?. we'd like to get some hits before we commit to a 10...
We have been thinking about switching but heard there are still issues with flakey pressure downtrack. Supposedly some have the problem and some...
We ran a big chief chevy with a good roots blower and made around 2400hp at 9000rpm and 46 psi. We knew it was getting to the limits of the combo...
We're putting a psi-D on a big chief chevy outlaw promod. We have a rcd small snout with a 34t 8mm gt pulley. Planning on 92% od. We might be able...
We just got a D rotor for our 540 Chevy. I can't think of anybody that ran one other than Houde/Filikins. Anybody know of another team that tried...
Anybody know how to tell a B C or D rotor apart by looking at them? Looking at one with no numbers on it. What year was the C rotor started? Did...
We're installing a blown big chief wetsump engine where a drysump hemi used to live. The chevy pan hangs two inches below the framerails.A drysump...
I have 2 sets of weld alumastars for spindlemount strange struts.One older one newer We tried to swap the wheels and brake rotors and it looks...
