Separate names with a comma.
anybody tried one of these high speed cameras to look at rear wheels? there are less than $300
can anybody help me with the AMP part number of the 2 pin connector that is used on the Mag 44 trigger cable. it's also on the mag timing...
read another post that says should run 60% in hat and 40% in port is this the case for screw blower also?
msd 8134 or something else What do you use to kill you mag? thinking it would be best to keep coil wires from inside vehicle
Blown SBC rod bearings from Clevite is it worth the extra to buy the coated ones? summit prices CLE-CB663HND $8.95 or CLE-CB663HNDK $23.95
anyone refinished their PSI mag hat? process? cost?
is there a relationship between size of top pulley and belt brakeage? what I am asking should largest possible pully be use or is smallest pulley...
what are you thoughts on it? zoomies doorcar anybody tried them? how long they last? best type aluminum tube to use? 6063? best...
I am changing from SBC snout to a BBC snout the RCD crank hub has 2 1/4" keyways per Paco at RCD the Crank has 1/4 and a woodruff key way...
I am thinking about getting one and wanted to check and see if anyone on here had installed one, and if they have any seconds thoughts on getting it
removed air cylinder and intalled a 2 step when 2 step is activated the tach goes crazy is this normal? thanks
has anyone do any research on wheather mag 44 spark plug wires should be seperated or if just zipped tied together is ok
is there any kind of magic number on the relationship? converter flash 6200, launch is 5500, blown sbc 14:71 30lbs, powerglide 1.81, 34.5x17...
can someone get me in the ballpark as far as weight of a BAE Hemi intake to pan weighs? making an engine stand/dolly and need to know for...
does anyone have a 3D model of a gear section and a reverser? or know where one is? I want to build a stand to hold complete 3 speeds with...
got a 16gpm pump at 4000 rpm pump got 120 in pump loop got 140 in main jet my chart from fuel guy says we will have 8 gpm 100psi at 8000...
we had a guy look at our graph this weekend and he said if it was his car (with a clutch) he would put more weight on it to hold the motor down...
I was setting up mag yesterday and wanted to know if what i was seeing is normal. this was my first time to do this. I cut up and old cap so I...
are they the same? what the difference if any? thanks
what is best to cool hemi between rounds now that it is 100 degrees? Portacool Icool anything new to use?
