Separate names with a comma.
I am building a portable remote oil cooler for my powerglide any idea what pump pressure i would need to circulate fluid efficiently through the...
Any thoughts on running the Taylor thunder volt 50 series wires with a mallory sm iv.on a blown 540 bbc we want to run with a data logger so i...
Has anyone successfully used a Mallory mag iv and a rpm data logger in a door car? with a tach adapter as opposed to the crank pickup that is...
Sorry to hi jack the first thread on this topic but i am very interested in this info as i have a similar set up 2600# door car blown 540, 168 1st...
Any thoughts on the max amount of material removed to balance rods on the small end with a 1.094 pin. he reason i ask is we have a set of GRP 5000...
What is the spark plug wire of choice if using a super mag iv on a blown alcohol motor, and if it matters there will be a RPM data logger.I was...
What is the best choice of belt/pulley to use and why. 8mm,13.9mm etc? i have a bbc 540ci with a rcd idler and was going to run 8mm belt and...
Ok so i have decided to not to run a cooling system thanks to all the advice given. But my question now is should i fill my block if so to where...
thinking about running a cooling system in my blown bbc door car 1500hp, any thoughts? pros or cons? any input would be welcome. have a filled...
Building my blown 540,dart block,aluminum RHS heads, 1471 BDS, 11:1 planning to run 20lbs max boost for now don't have exact cam specs but lift...
I am building my first bbc blown alcohol motor am going to purchase a dart big m block should i use a tall or standard deck height and why? Thanks...
Any thoughts on running a 477 ci bbc 4.50x3.75 combo? pros cons what rod length would be suggested with a tall deck block? any info would be...
bbc advice Can any one suggest a good rotating package to run in a 4.5 bore 10.2 deck bbc to make a safe 1500hp or so i have a bowtie block,...
trying to figure out what application these rods may be used in as the length is a bit short, they measure 1.091 pin dia,2.497 journal dia,6.533...
does any one know if there is a rev limiter available to run with a mallory super mag iv? if so where can i get one? part # etc Thanks in advance...
I just purchased an older mooneyham 1471 standard opening and base but when i set it on a mooneyham intake there is open spaces at the front and...
Looking for some advice i am thinking of converting my 572 blown gas motor to blown alcohol and want to run a very mild set up this year typically...
