Separate names with a comma.
Blown alcohol small chevy, 17-20psi typical. I'm getting a good puff of oil smoke at the hit, and narrowed it down to the intake guides. They...
Anyone know of a stocking dealer? Shelby, Summit & Jegs are all out of stock. Thanks.
Please keep your eyes open for a white chevy 3500 pickup with a 32 foot tag trailer. Donnie Watkins got home after just finnishing up his license...
I have a little 'play' money and i'm thinking of getting a camera for the car. I can't swing for the HD GoPro (330+), but i can do a regular...
MasterCraft Safety Announces the Acquisition Of Bill Simpson’s Impact! Racing With the introduction of the suspension seat to the niche...
I'm looking for a weight for a straight wall .990 pin, can't remember the length, but it is like 2.970? appears to be a pretty common length....
Have a friend that is going to break in a cam. It has freshly coated headers on it. Any tips on how to not hurt the coating? 340 Chrysler,...
I need to replace a couple pin buttons. I have 990 pins, BME pistons. BME won't call me back or email me about getting replacement buttons....
I've never had a glide valve body apart (the two halves). I took mine apart tonight. I saw two balls, and took note of their location, however a...
I have a greer offset drive. I would like to contact the company. Anyone have their contact info? Can't seem to come up with anything on Google....
I broke high gear last SUnday in the dragster, and it revved pretty hard...... Opinions on replacing the rod bolts? Rods are Eagle 4340, 6"...
Ok, let's catch up................... I'm frustrated. Here is a list of things that have changed: - decked block .015 - decked heads...
In retorquing my heads, i zeroed my wrench when i finished one side, and then loosened a stud on the other side and started pulling to retorque. I...
Anyone using T&D stuff? I have a question for you if you do. Please let me know. thanks.
I'm going to run a BBC pump on my little M. Anyone know of a driveshaft that'll fit? It's a 400main LIttle M, and they take a 'special'...
Putting together my small chevy. We run NE1 / 7.0 Pro (maybe). I'm new to copper & o-rings. What is the preferred thickness of the gasket? i'm...
So, Manley springs, 520# on the seat, 9000 RPM, Brad 6 heads. The ends of the springs are breaking off. All of them. Talking the last 1/8" to...
I'm intersted in helping/learning at the divisional race in Sonoma. Does anyone need a hardworker? I'll pay my own way if needed, just looking...
Well, after having a problem with oil pressure tomorrow during our test session, i brought it home and started digging today. I found that the oil...
No one in sac has an injector gasket. I'm considering making two of them, or using 'Right-Stuff'. Has anyone ever used it for injector gaskets?
