Separate names with a comma.
Ok, its not for hard core racing but my street/strip build hemi 426 needs a set of hydraulic roller lifters. Standard hemi diameter. Who could...
If you spin a main you can fit a saddle and a new cap, thats fine. What about if the rear seal area is damaged. The crank is already 3" main...
Tried the usual www.raybarton.com website but it never connects, tried to google it and nothing comes up ???? Ordered some parts from these guys...
In regards to the 426 Hemi. Are all the valve covers for twin plug heads the same, not counting exotic heads like the BAE or TFX. Im refrerring to...
I have a KB alloy block which has wet sleeves. The sleeves seal at the base and top with a o-ring. I cant see the top leaking as its seals...
I have a bunch (11) of darton sleeves from my KB stage 10 block. The issue is they all have a large notch cut out of the top edge for intake valve...
I am searching for someone who makes a 1" diameter solid roller lifter that has internal oiling for the roller? CamFX , Crower , Isky ?????????
I have a KB block with solid roller lifters/cam. I have heard that at prolonged idle situations the lifters/cam will fail due to insufficient...
I have an early stage 10 KB block with a raised cam. I'm trying to get the gear drive sorted out to fit this block. I have a KB raised cam gear...
