Separate names with a comma.
Just started recently 526 BAE Hemi 18-71 M5 Mag 44, power grid ignition. I start it with 24 volts and the cranking speed is very high. I...
I run a stage V fathead and the came with a 2.500 TI intake valves Manley part #11930 vs BAE's standard 2.425. Is there a reason for this?...
I'm looking for a piece 67" long X 3" tall by 3/32 or 1/8 thick, something finished on both sides.... Building a new wing for the truck and need...
I run a K 8 with a spacer and it has been modified on a 526 BAE hemi. When does this blower become inefficient. I started out at 35% over at...
Ok who's running one? Door car 3000-3200lbs blown Alcohol 2500 hp ish 1.10 60' 6.90 1/4. I want to get one but do they hold up? I know PST is...
Blown BAE door car with 5 inch muffler collector. .049 or .065 ? I wanna use the .049 for weight savings will they hold up?
Seems everybody is making the 12 and 16 volt stuff, but what about the blown Alcohol guys that need 24 V? I spoke wit John Brady he said I could...
Is it a bad Idea to lift a BAE Hemi with a magnesium intake? Was gonna make a plate and bolt it to the top of the intake using all of the...
BAE hemi supercharged 2300hp/3200lbs converter driven 2 speed on 10.5's.......What first gear and rear gear you running? I started with a 1.40...
Currently I'm running 1 six shooter controlled by a Lehay box can I hook up a second six shooter for 6 more stages of timing control and will...
I have a 526 BAE Hemi MAG 44 I currently use 2-12 volt rock batteries for a total of 24 volts, it starts great!! My question is I want to...
526 BAE 1471 K8 3200 lbs auto trans door car 10.5 w's tires. Using lean out silinoid while on 2 step- installed big cap think the rotor was to...
BAE 526 hemi convertor driven 3200 lbs door car. I got a .80 jet in the 2 step lean out with the six shooter were pulling 14 degrees and when I...
I'm running a 526 Brad V with a K-11 35% over in a 3200lbs door car convertor driven, I also run a 10.5W's. My question is I'm running a 6...
What silinoid is everone using to return fuel while on the 2 step (blown Alk) and what size jet should I start with? thanks
I have a BAE hemi and there is no place to bolt a chain to on the head to lift this heavy beast. Can I make a plate and bolt it to the BAE...
What is the preferred oil pump for the guys running Brad hemi's with a wet sump Im looking at the system 1 stuff - Thanks
I have a 526 brad Hemi in a door car and have clearance issues around the steering, the Milidon pump does fit but not a KB. I had the Milidon on...
typical 526 BAE hemi with stage V Fat heads, Im building a 10.5 outlaw door car and I have limited space due to having to run stock frame...
Who sells a on board start for BAE hemi with a Mag44 that will bolt to a Coan mid plate adapter. Also do I have to spin the motor extra fast to...
