Separate names with a comma.
i just changed my crankshaft from 4.375 to 4.250 x4.375 bore i poored my chambers and get 121 cc with 7.276 rod and .070 gasket i figured it is...
i always liked brooks rods and now that mine have been ordered for 2 months and cant get ahold of them its time to move on (so jerry at brooks...
msd 8973 do i have to run the two yellow wires to the points box or can i just leave the rpm chip in it i never change it on myother car so if...
i put new strange rotors on my pro mod and flushed all brake fluid and installed napa dot 5 brake fluid now the pedal falls to the floor on...
what rpm is the lencodrive brake good to long story short mine just burnt up at 4800 rpm then i lowered it to 3800 (air throttle) and set two...
brad 5 psi c 1/8 some 1/4 112 od what plugs should i use 10 or 11 and where is the best place to buy them thanks duane 618-259-9874home...
i have a gear that is the size of a fine spline lenco output shaft i need internal splines put in about 10 of these any body know where i can...
i have a bracket car na 454 small block runs 8.90 at 2650lbs rons terminator on methanol 1964 chevy 2 havent drove it or raced it since buying...
i need lenco reverser parts call me if you have any or i need paul catoni phone # need heli cut and straight cut planetary/sun/ring gears...
1-should it be a push or pull type cable 2-i currenty have a push type and dont want to change the pedal assy 3-what brand and or where are...
how long does nitro last 55 gallon drum is it like alcohol and absorbe moisture thanks
i need to know rpms for several gear ratios 1/8 and 1/4 im running a 3spd lenco drive cs2 c screw blower promod brad 5 1st...
im getting ahead of myself but we may be required to run some nitro next year (match races) is their any place in stlouis metro ill. area to...
i know a lot of promod lenco drive cars running 5.13 and 1.40 1st gear=7.18 hit if a guy wanted to do a few 1/4 mile races is their a problem...
i didnt know this but i seem to have aquired a set of mixmatched lifters 3 are aprox. .100 taller is this a common thing my engine pushrod...
video cameramust integrat with racepake v300 im wondering what every one is using for a starting line camera and tripod i would prefer a sd...
i need aproximate flow for littlbertha pump .700 gears .750 .800 .850 .900 at 8000 engine rpm i have 2 pumps .800- .900 gear set and a...
i have a brad 5 pm legal head 4.467x4.250 brad forged block/psi c blower 115 0d havent decided yet on od and lower plate is cut out only...
how much boost is the psi large square port air foil kit and the lip worth at 9000rpm on a psi d at 92 and 115 od thanks
im switching from good roots dmpe 14/71 to psi d @125over the cam i have now is 426 hemi 500000 s51506 crh-334/334-14r dur @050 is i 296 e...
