Separate names with a comma.
mods Todd Tutterow or FFI does the mods. They smooth out the pressure curve/flow. It helps the temp a little and I think it makes the...
Brt I was told suck from the pan and return to the pressure gage port.ive been cooling mine for several years. It runs hot no matter what....
Regardless of the air 172 mph is no slouch.blip the timing around the shift and keep shake away.180 to 1-1 is painful and even worse with a tall...
The best thing I can say about a BAE is it must be inherently reliable because morons are going fast with them and smart guys are going extremely...
chevy It can run a lot better...We went 1.03 4.19 173mph @2900 lbs with about the same stuff. You should be lean. In good air we had a stout 990...
1/4 Doug, I don't know why I still think about chevy stuff but i've talked to a couple guys that run a 3 spd in the 1/8th and I think it...
They are a good forged rod. Jim oddly used them in his chevys.
Does anybody know the total pulley tooth count/belt length for 100 tall std intake setup for BAE5? If it matters i'll run 92% and 107%. thanks
dyno The dyno has more value on a oddball program. If you're running std stuff that Salemi recommended it's probably better to spend the...
belts I just checked RCD's prices. They're climbing about as fast as AR15 prices. 400.00 for 11mm 1705. I don't get it. Get a couple extra laps...
Thanks Brandon ill call ken.
lifter im in the same boat. Jesel is highly regarded and 2600.00. A lot of guys like crane which are cheap in comparison and I have a hurt one in...
Bae I just got a bae recently and the biggest hp spread Estimate i got between all the bae heads was 100 hp. Some guys were as low as 50. That...
the flywheel i ran is 14-1/16 inches 168T and it barely fit. I milled a little of the bruno mating surface to clear a wolfe deep pan and I dialed...
can I have the 6046 with a few mods to make it work. Id consider selling it as we switched to a hemi. Mike 3162593883
Bae I'm working on my first bae and I can't believe how unrefined the oil system is.my block has slots above the cam in the valley. They are...
Not much.cs2 is shorter and fatter but not much weight savings at all.
brt we have 34.5 tires lit at approx 8000rpm for the burnout. That's all it's going to get. Obviously the heat comes from the converter so...
140 idling 220 to 285 after burnout 300 after a run. Basically it's happier going down track than idling.
bummer What was your chevy block setup? Water? What was the deck ht? We're switching to a billet hemi from a chevy and expect 60lbs...
