Separate names with a comma.
fabshop I saw a set on a ADRL car. Work of art and no repairs in a season. That's saying a lot on a 2 step car.
drainback do a search and you'll find plenty of info on this topic. I spent a lot of time sorting out a chevy and a decent amount of time on a...
Square, shaped just like our fuel cell.
tank Josh, I have a fabricated Jeffers oil tank from my car when it was used for 1/4 mile. I think it was run with 15-18 qts and has a heating...
mbr I looked at the engine before switching to BAE. Miner was impressive but he told me all the cast stuff was useless and I knew the rig was at...
conv Mick Snyder can steer you in the right direction.
I had a coan 265 with several stators and some were drilled. I think it was supposed to soften the lockup like you want. I asked Chance about it...
spline I've heard positives about both but I think the PSI requires less money in associated oddball stuff to convert.
cracked A crank with no repairs only lasts so long... I guess it might make sense if it's a cast block budget type deal. We broke a fresh...
My best 60' is 108, normal is 110 to 113. So the lighter the car the harder to get it down the track w/the same power ??? With those sixty...
[it is correct providing you can get the car to hook and go down the track I've run from 2900 to 2430 lbs and al lot depends on how good your...
5.70 Nickelson screw viper
plate I can't afford science projects but i dug into this one because I was trying to get a chevy to work with a screw and air throttle. The...
rods You never said what rod you use but we ran GRP/MGP for 40 hits at 8800rpm 40-47psi 1/8th mile. Get a valvespring checker and keep a log....
port if the car will idle you can launch wide open on the 2 step and all the checks are meaningless. If you have a flowmeter you should be...
plate The plate probably wont help. Neither will poppet pressures. With the plate You can disconnect #2 port nozzle on a BAE at idle and rev it...
pp Call JR at RBS. He will take the drysump pump in trade against a new wetsump type. It's a lot cleaner and lighter than converting.
Look at what the car is telling you. Its always got something to say...:cool: All my car ever says is it wants a new owner...
ratios I've seen lots of 5.0 and 5.14 rears and as low as 1.41 low with a 36 inch tire. The low gear ratio can be determined by how fast full...
rocker I have TD on my BAE screw combo. They look good and oil a lot better than most. No special procedures to avoid burned pushrods. I was...
