Separate names with a comma.
The two step doesn't kill the belt...it's when the throttle blades are wide open against it. I use the air throttle in conjunction with it and...
The oiling is totally trouble free. Supposedly several different designs with different sized studs for the shafts. We have the smaller ones and...
hub the worst i've heard is spinning the whole crank and timing cover in a lathe. I've cut a iron one off a chevy with a cutting wheel. You...
Fluid We've run redline lightweight racing ATF for 2 seasons with good results. We see over 300 degrees and have never changed it due to...
cooler Mikes plumbing is correct. We run the deep bruno pan and have monitored temps and pressures for years. We bought a cheapo plastic...
E85 It has consistency problems. Anybody that I've seen push it buys e98 and blends their own. At 2.85 per gallon yesterday I don't see how it...
Bae Any fathead will work good enough to set records in a boat.only about 150hp from 5 to 8x. The blower will make a lot more difference. Ihra...
heads I wouldn't be surprised if a 481x could dominate that application.
stagger pretty common to drop compression on a few holes to avoid nozzles sizes with huge differences. It has a lot to do with the psi plate...
What's suggested for 521 bae5 with c rotor at 128% 9600 rpm? I will be running staggered compression on 1 ,3 and 6. Thanks
launch you'll have a lot more fun with a timing control on it. 8973's are cheap,effective and easy to use.
Mike have you seen actual results playing with the charge pressure.? I have done mods in the Bruno and converter that made major changes in...
Rbs Rbs has them
liberty thats a lot of power. I would think gutting it down to a 2spd would be a lot lighter than a CS2 lenco. I think they tend to stay in...
I've seen one in a turbo car but I guess that information is useless for someone trying to go fast..lol.
rpm The only weakness I know of with RPM is pro level guys use racepak. If you want to bounce tuneups and data off the fast guys they will not be...
alky M5 requires more gpm due to oxygen content. The only person i've discussed it with was Clark bros so I assume Pesz knows all the benefits....
2 or 3 Keep in mind who you get advice from.A few 1/4 mile outlaw guys started running 2 spds and were happy with the performance and even set...
lifter I ran the bushing type EZ roll for years on my Chevy but it actually has an oil system so I wasn't sure on the BAE. Morel was highly...
The Chevy can do a lot up to 8500 or 9000 depending on the heads. If you bought good bottom end stuff the valvetrain will be the weakness. If it's...
