Separate names with a comma.
Put The Port Nozzles And Be Finished With It
Pulley A 25 Is It, And Mine Rubbed A Little Also
Crank I Ran A 509" With A Steel Chevy Crank, 14/71 Hi Helix 45 Over 38 Lbs With Chevy Conventional Heads. We Never Had A Bearing Or Crank Issue,...
I Saw The Plugs, Doesnt Appear To Be A Single Vertical Crack, But Maybe A Series Of Them Along The Ribbed Section. Looks Like It Was Arcing Right...
Heads I Wondered The Same... I Saw Some Big Chiefs On A 481x Block Before
Is There Any Way To Signal A V300 And Ultradash Besides That Inductive Pickup? No 8973 Just A Points Box On This One
Xtreme I Bought Some Stuff From Them, Never Had A Problem
Nozzles Yes We Are Going To Do The Standard 4 Nozzles In The Hat
Plumbing Up A Psi Screw On A Doorslammer, Was Going To Try Going The Single Line-nozzle For The Ports,to Keep The Plumbing A Little Cleaner. We...
Flow Lance Flanakin, Also Fixes A Few Crankshafts In Houston, Dont Have The Number Handy
Primer I Was Cranking My Car Once, About 57 Degrees I Guess....didnt Feel That Cold, Started Scratching My Head Until I Looked At The Temp.... A...
Primer It Will Start On Straight Alky As Long As Its Not Colder Than 60 Degrees. Seen It Done With A Small Pump And A Extra Nozzle
Fuel Probably The Easiest, And Nicer Ways Is A Electronic Timer- A Lahey Box And A Management System. Take Fuel Add Fuel Drink Fuel Spill Fuel...
Switch TIM MCAMIS http://store.trackerdesigns.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=TMRCI&Category_Code=Pneumatics THIS SWITCH IS...
Belt I Wouldnt Try It On A Roots... The Whipple Didnt Care Though. It Was A 65 Mm Width Also, 55- Over And 9,000 Rpms
Whipple If You Run A Regular 13.9 Or 14 Mm You Will Not Need To Switch The Idler, Its Not Going To Jump Teeth, I Even Ran A Mismatched Combo 13.9...
Belt I Ran 55 Over Most Times, On A 14 Mm Belt Ran For Like 3 Years On One Belt. Never Broke One.they Real Easy On Belts
Belt I'd Use Whatever Pullies You May Already Have 8,14, Or 13.9 Would Work Fine
Saver Thanks Guys, Pretty Much Answers The Question. I'll Keep It Going To The Hat Block. Does The Billet Gorr Valve Use One Also? Or Do You Tee...
Is A Pump Saver Line And Poppet Needed On A Typical Roots Blown 16 Gpm Fuel System? My Fuel Pressure Sensor Is In The Distribution Block And I've...
