Separate names with a comma.
Asking for a buddy. Is there anything stopping a person from running zoomies up thru the hood in a ProMod/TopSportsman type application? If...
Can a 14mm belt be used with a screw at high overdrive? Or is there some downside to doing so? Just thinking if 8mm belt life is short, and the...
A lot of the competition diesel engines use "fire rings" to seal the combustion pressure. A groove is cut in both the head and the block, and a...
Okay, what are the main differences between an alcohol funny car chassis and a fuel funny car chassis? Just the chassis, not the body. Any input...
Roughly, how much rear areo downforce are people generating with Outlaw PM's these days? Either through body work or through wings/spoilers? As...
For those who are running 8mm belts [the good Problem Solver PS purple belt....], with a PSI D or C at 200% or way more O/D, what top pulley tooth...
I've never seen any actual numbers on this, and I was curious if anyone has some rough ballpark numbers to put a frame work around this topic????...
Curious, what is typical these days for stroke and RPM limit for a competetive blown alcohol TAD? Just wondering so I can do some "what if"...
Has anyone had any luck finding a decent, affordable, engine simulation software program that plays reasonably well with supercharged alcohol...
What's the highest O/D that anyone has tried with a C or D, and what sort of max compressor shaft RPM did that turn out to be? How much RPM can...
Let's say a person wanted to extend the length of a PSI screw blower snout, forward further away from the case leaving the case where it is, what...
Can anyone tell me what the actual internal compresion ratio is for the PSI-C? Thanks.
Has anybody ventured down the road of trying a metal matrix composite (MMC) connecting rod in a blown alcohol deal? If you would prefer, PM me or...
Looking for some rough numbers here...... Either on the dyno, or at the track, has anyone ever measured their actual crankcase blowby air flow...
In a blown converter drive application (funny or promod or something similar), from a driver's point of view, is a handbrake that useful or...
Anybody have a clue as to exactly what this product is doing and/or how? Any real world field experiences with this or other similar products?...
Curious what's current these days in terms of typical block deck height, rod length, and stroke for a few of the blown (screw) Pro alcohol...
In the case of a blown motor (typical alky or nitro deal), solid AL block, solid AL heads, fuel system cleaned & pickled............Is there any...
Curious what is typical these days in the top ADRL Pro Extreme ranks for rear gear and 1st & 2nd ratios. Doing some simulation modelling and...
For a C or D screw on methanol is the job of the hat fuel (above the rotors) primarily for cooling and sealing, or lubrication of the rotors, or...