Separate names with a comma.
Some use shorter rods in problem cylinders. T/F have been doing this for 30 years.
You might think about some sort of cover for the belt drive. If a blower belt comes apart and gets into the belt drive you can waste a ton of...
You are not splitting hairs. Think of how much force is being applied by the levers. If all the weight is hanging off one side of the lever it...
I do. I don't worry about it when I adjust it but I set it up as even as possible.
Is the main in the barrel valve? If so it's returning though the idle/secondary check anyway.
Not brain surgery but: Rocket science?
When we re sized the rods the big ends were smaller than spec. so we didn't cut the caps. Like I said above I don't want to be a guinea pig but...
The pump saver port is just like a idle port, so I cant think of any reason why not.
Thanks to everybody. These types of discussions help save us poor boys money. I've hever really liked learning from my mistakes.
Veney's injected big block chevy 'Vega half way through the page merge collectors...
Thats 68.5% hat 31.5% port. Its gonna hall ass! Bring the ports back to 25 psi when you first try that -8 idle . It might sound crazy but if it...
a rule of thumb is .001 on anything that's less than an inch and .001' per inch on anything over but this doesn't apply on blown alky. .005' or...
LOL :):):):) My block scenario was with aluminum caps. Im not sure what happens with steel caps.
A110 pump is kind of small (13.6 if I remember right) put I suppose it would work if you dont return much. On screw blown motors we replace the...
Yea, I think this is part of it, we had a set of BME's in a 9 second 455 pontiac motor back in the 80's. We resized them a couple times in 1000...
160psi pump loop? Are you talking about the pump saver on the top of the b.v.? The loop would be down by the pump (sometimes called a high...
Could we have some more information? is it a k style b.v.? Idle return pressure? pump loop pressure? Hat Nozzle area? What fuel pump? Is the b.v....
Don hudson and kosky racing Id like to know the more specific problems with this. Just out of curiosity and because its easier and cheaper to...
Mike The reason is the bolts. When an aluminum block is hot it grows you can pull the sleeve way easier than cold but the mains torqued down by...
Is this a trick question??? Will, you know they wont allow 5' bore space in TAD. Remember the Walt Austin 4.9 bs ford deal? That was before they...