Separate names with a comma.
ok heres a knew one You may need longer pushrods.
oil pressure concernes that's what I was afraid of.
oil pressure concernes I will have to look again
Is there enough bearing options out there to accomplish this without turning the crank down?
I had .006 on mains tightened .001 but as you all know Bryant turns them down more than street pieces. I have 130 lbs cold. drops quickly with...
Well i tightened up mains and am now pulling off both valve covers with a single line at rear of each. Still loosing pressure when warm. When...
Just wanted everyone to know my previous resin repairs failed. But I finally got it. And West systems 105 resin and 205 hardener ( EPOXY ) did the...
decal glue removal 3m makes an adhesive remover. works great
dry sump filter I have the same set up.
blower gell Prism is best
oil pressure I just had the problem Randy mentioned. tightened up mains. one line from each head in rear as you guys advised me to do. I...
thief I only buy parts from guys on here that everyone seems to know. Then review dealings with others. every one so far has been upstanding....
tdc indicator OK I'm convienced to use basic tdc tool. Thanks guys.
best tdc indicator thanks guys
who has the nicest Tdc tool to thread into a hemi with rod and return spring that will accept basic dial indicator. Any pics or links? Thanks guys.
Has anyone run Amsoil in there cars. And what are your thoughts. Any reason not too?
Great thank you, finally subsative info.
How many lbs per round? Do you torque side bolts all at same time in 2-3 steps.
Rolling in some .001 tighter king main bearings. Wanting to know what torgue sequence you guys use. KB block with two cross bolts on each side of...
900 + views and not one response come on guys. Sure would appreciate some feedback.
