Separate names with a comma.
One more question while Im at it Is it necessary to have the pie opening in the center of the intake for a screw? It works great for my roots....
Damn.....3.80's at 2700lbs with a BBC. Thats impressive.
Good Info Thanks. I think Ill try the screw out on my BBC before I get all sappy about buying a Hemi. I did buy a good crank, rods and pistons...
bbc Was wondering if the issue of 35+lbs of boost was wrecking havoc on the bottom ends?
Has anyone ever ran a Screw on a BBC? Most of the folks I know run a Hemi.
I live about 20 miles from the facility where they make that stuff. (Durant OK) Ive run it before and had no luck. Brad Penn has been good though....
set back I actually had a sheet metal intake made that has the opening directly in the center. My port jets are square and needed no offset....
I run a 565 with 18 degree Big Chiefs similar to yours. I run no more than 32 degrees at 22lbs of boost. Makes good power from 26 to 30 degrees....
Any distributors out there? Lookin to buy a few cases for next season.
Did you heat the hub up before you tried to pull it?
Well, I tell ya what Ive done. I took a 565 BBC, 2 1050 doms, sheet metal intake that was running a 500hp shot of nitrous and put a 14/71 blower...
Perfect Thanks:D
I bought an old SSI 14/71 HH awhile back and was wondering How do I tell which model it is? Is there numbers or markings to look for?
4.5 bore Can you put a 4.5 bore in a v6 chevy? What block are you using?
hemi I appreciate all the input. However, Im looking for input on the actual block, heads, etc....I understand there is ALOT of head and block...
Im currently running a BBC 565 14/71HH SSI @ 24%OD making around 1900hp and am having a few issues keeping the bottom end together. I am thinking...
sounds about right. A friend of mine ran a similar set up and made about the same. What kind of 8-71?
Would you gain any power from a longer stroke or does it matter with a blower?
Im building a backup motor. Its a BBC 9.8 deck. If you had an option for stroke would you use a 4.0, 4.25 or 4.375? If so why? Ive been running a...
I use a Coca Cola box with a thin bead of Right Stuff along the pie perimeter for my blower base gasket. I use the screened one for the gasket...
