Separate names with a comma.
Are you running a converter or a clutch? I have never ran that much pressure in a slick before, but I will tell you that I have had success with...
Can any one identify these lifters? There are no markings on them anywhere. Thanks. [IMG]
Care to share what you have learned? Is there a way to tell if they are Cranes or not? I have a set that are unmarked and the owner seems to think...
so your looking at 15 mins of heating the oil completely?
Your not going to find a set of Brooks rods. We have been running the GRP's. They were a little heavier then the Brooks rods that they replaced,...
why is it that people have to use the switch to toggle between the mag and the crank trigger? I have seen some a car that wouldnt start, they...
If we are talking car counts, there are some top dragsters out there that are capable of running sub 6 second runs and could have qualified at...
Just call Crane and ask for Chase, if he doesnt answer, leave a message and he will get back to you.
If the heads are bare aluminum, you would want to paint a small black dot on the spot where you will be checking the temp with your infer-red gun.
Have you tried calling there and talking to Chase Knight? He has been there what seems like forever, has done lots of work with the Hemi stuff and...
I decided to cap the ends a put a gauge on the shutoff and blow shop air in it to see if there is any leakage past the spool in either direction....
What is the maximum allowable leakage for an Enderle fuel shutoff? Just curious at what point a rebuild is necessary. Thanks.
Does running the larger second ring gap help with ring stability and better oil control like the directions say?
X2. I can tell you that even 375 isn't enough. In general, the more the better.
why not use an air cylinder hooked to your chute handles so you can use the an air depoly if you like, and if that happens to fail, you can still...
Sounds like you are a 60/40 kind of guy, do you also run more fuel through the hat on a screw then what is recommended in the manual?
I have often pondered about the 60/40 spilt or the 40/60 split. I have talked to several people who claim that by shoving less fuel through the...
What type of tubing? Most of the people that have responded as using radiator hoses, said they replace them yearly as a from of maintenance.
For you guys running radiator hoses, do you also run the spring in them to prevent them from collapsing? What size pump (GPM wise) do we have to...
Do you converter guys look for the same number .5 in to the run as us clutch guys?
