Separate names with a comma.
That was my first thought also. I had issues with the exhaust side on a wedge combo before and a change of the camshaft helped out the situation.
If you are going to plumb back into the inlet of the pump give yourself a little distance for it to get straightened out to eliminate any...
x2, I like to use a valve stem cap on the liners so that someone doesn't inadvertently check the liner pressure with the low pressure gauge. Are...
thanks guys, .051 safety wire seems to be the general consensus from the people that I talked to.
What type of wire are you guys using for stainless O-Ring wire in the head to help seal the combustion chamber? Where is a good place to buy?...
What are you guys using for a pressure switch to convert an air signal from the shift pod to an electic signal to trigger an electric lean out...
You can load them up to a 3rd party like photobucket or image shack and then copy and paste the link here.
I would also give B&J a call, I think that they might be a little more helpful when it comes to the converter side of things, along with some...
You can run a bruno drive or a Quick drive from B&J. Depends on what you are planning to do with it and what class you are running. Both accept...
What spring chart do you have? The old one or the new one? The old one has different number then the new ones (same springs). It really doesn't...
Timing retard can be hard on the exhaust valve as the combustion event happens later in the cycle and is burning going out the exhaust, which...
I have the computech in one of the cars that I crew on. It's not quite a racepack, but it gives you most of the same information. If you are on a...
They are all good clutchs. I have never run an East West clutch but I have seen some of there stuff out there running around and they had some...
Just recently had one of the mains saddled in one of my blocks after breaking a crank and tearing up one of the mains. Is it common practice check...
Which do you prefer the screen at the BV or the filter? I run the screen in the barrel valve currently and I check it every run. You will be...
From what the article says, the only one at Pomona deemed with an illegal blower was the Jackson team. With the fines and all I doubt that if...
Reducing your duration will generally 'move down' your effective power band. I ran the numbers real quick and it appears that you will be opening...
How does that work? Don't you have to send it back to get it recerted? Wasn't PSI not re-certifying blowers with Kevins coating for awhile. If...
Why did they drop the alcohol classes from Englishtown?
Are these 'illegal mods' available from PSI? Is this like the coating deal that they were offering when you sent your blower back to get recerted...
