Separate names with a comma.
Great job on your win! Jr, TJ, Duke and Reds all that hard work is paying off; two finals in a row! See you guys in Virginia. Rob, Dan, and Bob
The second pill being inline between your port check and the distribution block? Was there an approx. percentage to between the two or will they...
You plan on having it together and making passes by the end of the year?
Great job! What overdrive are you running?
Sprag replacement module, they refer to it as a mechanical diode. Not sure about the air assist, if it helps push the mechanical diode levers out...
What's the horsepower limit of the sprag eliminator? Anyone ever use the air assisted sprag deal that lenco offers?
I have one two stators that are the same angle, but one has the holes drilled in it. It was my understanding that the holes were to assist in...
Think of it as the heavier it is, the slower it will accelerate and the longer it will stay in motion. The lighter it is, the quicker it will...
What kind of mph? How much are you wearing off of the clutch? Either your tuneup is off or you don't have enough weight to lock the clutch up. As...
What kind of duration on the cam? Is your 4.6 bore block solid? Any issues with cylinder distortion or ring seal with it? Thanks in advance. I...
Do you have enough side clearance and what is your bearing clearance on that journal? Is the rod in correctly with the bevel facing the radius? If...
I made my own out of these cutters that come as a kit, they looked kind of like a mini hole saw, used the center of it as a pilot in the oil hole...
On our Hemi I machined for a rubber oring in the head AND in the block so that we don't have to worry about using sealer, waiting for it to dry,...
So you read the rule the same way that I did, that they don't exactly say that you can or cannot run one. I have a working prototype for a lockup...
You guys left Wayne Morris off that list as well. He has run the converter drive in a dragster and more recently in a funny car. Again I would...
The example of Austin's car was in response to mike canter saying he believed that the ET is made in the first 330 ft. If you look at the numbers...
To the best of my recollection, there used to be a 50lb weight break in dragster for running a wedge headed motor such as a big block Chevy or the...
Mike, I used to agree with you until I came across this run by Mike Austin testing earlier this year in Jim Whiteleys car from last year with the...
The thing with the converter is you can't take the inspection window off and tweak it to the track. To do this you have to pull the converter...
And it's fair that a clutch can lock 100% but not the converter? I don't think that the weight break is the answer.
