Separate names with a comma.
Still seeking advise on valve to piston clearence and max compression ratio for 8/71 blown Hemi.... Cheers dave
I'm changing the set up on my Alcohol 480" Hemi. 8/71 std helix. currently 11.0/1 compression. Blower makes 21lbs boost at 8500rpm Need advise...
Own Block....who is this? I will be at WSID, but not racing. I dropped a valve 2 weekends ago, so its still in bits.
Thanks guys, it sounds like I shouldnt risk any more runs. Amongst these 33 passes so far, I have broken a few rockers, lifters and dropped one...
Thanks, what brand of rod are you running?
I run Billet rods in a 7 second blown Alcohol dragster....how many passes on a set of rods before we replace them? Ive heard some say 20, some...
What part of OZ are you in? There are a few guys that could flow your system...Lowe, Fab, Weldwell, A very basic starting point would be: 8 x...
Building a new Funny car, and need to know the rear axle centerline distance from the ground, with a 36" tire, and a 34.5" tire. Appreciate it if...
What would be the advantage? An overdrive % on the rear end to provide lower RPM and more top end pull? Sounds clever. You have any idea how...
I have a 480" BBC motor which is similar to yours. 4.5 bore x 3.76 stroke. 11:1 compression. 8/71 standard (but new) blower spinning 40% over....
Make sure your lifters have the raised link bar. Normal height lift bars can bottom out on the top of the lifter bore when the cam is down on the...
Hi Keith, Nice FC. I would like to see a pic. (Im also building a '70 Cuda FC) In the dragster we have 8 x 40's in hat. 8 x 50's in ports 990...
Boost is about 25lbs. Standard helix 8/71 spinning 40% over. 11/1 compression. I run this thing in a FED, in Nostalgia class. 7.1 at 191 Trying...
Seeking advise on how far we can push our tune up... Arias Hemi Chevy. Solid aluminum heads. 8/71 blower. We have 1140F exhaust temp, only...
I run a Mallory supermag 5 and have just installed an Autometer 6601 Tacho. according to Autometer directions, have wired it using the Autometer...
I would appreciate your comments on my base line tune for a blown hemi...am I close? 480", 11 to 1 compression, 8/71 standard helix blower...
I need a base line clutch setting for my Dragster. Its a 480" blown Arias hemi-chevy, Front engine dragster. Runs a 3 plate AFT, 6 finger, pedal...
