Separate names with a comma.
Marine Crank is the best.
What kind of injury does Ron August have?
Hey Frankie: I was taking my '54 Corvette on an open trailer to get it painted yesterday and was on the 57 Freeway around the 10 Freeway in...
Unless you twisted David Eden's arm at Marine Crank real hard he does not hard chrome cranks. He welds them with tooled steel, remachines them,...
My driver spent his life savings and is now trying to recoup. Costs a lot of money to run these cars, and people are being careful considering the...
We've run back to back low 5.60's just adjusting the clutch.
Let the blown cars run the "C" PSI with no overdrive limit, more cubic inches, and Powermist. 4 seconds?
So sad. I spoke to him whenever I saw him in the staging lanes. As a '54 Corvette owner we always had a lot to talk about. Gonna miss him. RIP...
Hmmm. At Mission in 1999 we lost a blower belt in the semi's against Bucky and it sucked itself into the front seal on our engine. This was...
You might get away with it...you might not. Rods are cheap. Blocks, camshafts, cranks, titanium valves, liners, pans and fires are not.
We really didn't know him personally but we are all still family. May God Bless Neal and his family. RG
Typically when that happens by the third run it'll toss a rod or two. I would change the rods if it were mine, and check the lifters along with...
Contact SFI and see what they know?
We just recovered from this issue that seems to run around the pits like the flu. If you are running an aluminum flywheel it could be flexing at...
After all that time are you sure it's the same crank?
Are you sure? Fires typically get drawn in when there is firewall damage after a kaboom. Could it be that depending on the firewall configuration...
I'll keep all this in mind next time we go out to dinner.:D
Whether it's sucked open or blown open the same dynamics still exists, the pressure inside the cab is lower than the pressure outside on the roof....
Barry: Most are not using latches anymore on the roof hatches. In our case even with a latch the pressure inside the body is blowing the hatch...
Barry: Melanie can sell you a kit that converts it to a "C" clamp style pretty reasonable. The air cylinder and valves are the same. I did it...
