Separate names with a comma.
Jim what heads are you using?
I use a 6-shooter with a Lahey timing controller.Its a great set up and very user friendly.
I ran the car had last weekend and no more lash problems. Thanks for all the input. The tip length had to be corrected on all of the valves.
Don't know what your generator issue is but my local Onan man told me if they sit for more than 2 weeks with ehtanol blended gas the carb starts...
Thanks for your input Noel. The tip lenght is a problem. Even with the increased lash the pushrods you made me show no signs of wear. You...
the radial groove on the valve is good and doesn't show signs of wear. The lash locks are from Ferrea and are 3 pieces. I have found out that the...
I hear you loud and clear Corey. I used to run 425lbs of seat pressure on a pontiac 427 casting head and when I got these Bac-Man heads they were...
I just pulled the lifter out and checked it again. There are no hard spots when I roll it and there doesn't seem to be any more bump in that...
the leak down is 16% on that cyl. when cold. It has more than .100 piston to valve clearance
I have an Arias chevy with Bac-Man billet heads. 522CI with mert HH14-71 at53%. 45 lbs boost at 8200 RPM.Comp ratio is 10.4 to 1. Seat pressure is...
I put my oil in a 5 gallon bucket with a screen over it and use a small fan to evaporate the fuel.I stir it up every so often to make sure all of...
I ran 18 volts for years with no problems. I also use an alarm battery now and it is 7 years old. It is in a sand/mud drag car which means it...
I have just delt with the same problem. You need to find out how many amps the brake controller will handle. Then find out how many amps each...
It would be hard to top what Will did last year for April Fools. It still cracks me up.
hey Mike I gave up taking notes after 1 conversation with Automan. I quickly realized that taping my conversations helped keep the info straight...LOL
I have had problens with JE as well. More than once which is my fault for going back to them. I switched to Venolia and have had no more issues.
I am running 38 to 45 lbs of boost on a BBC with BAC-MAN heads and I run 350 lbs of seat pressure with no problems
what are you tearing up? what is your seat pressure?
I ran that combo for years. I set them 13 to 15 cold depending on inital air temp. That always gave me 26 hot
call data pro directly. Their service is first rate.
