Separate names with a comma.
Well the $35k blowers are designed mainly for low OD rules such as NHRA Promod. You can’t spin them fast because the boost will roll over. I think...
What rules? Any overdrive limits? What kind of car is it going on? How much to be spent on it?
call Darren Mayer at 269.428.5070 https://www.dmpeinc.com/injector-hats.aspx
It is not going to hurt anything being a little high. Too low will hurt you but higher within limits will not. Looks like you tuneup is right on.
I find the best is 125-130 psi at 8000 rpm in first gear.
Pretty hard to find somebody to spin balance them anymore. Hoosier and Goodyear don’t have them in there track trailers anymore. They said they...
Grid replacement time for sure. If you want I can send you a Grid setting gouge I use that goes through every setting so you can check it or you...
Just one final review 1. You tried starting it with the Grid just hooked up to the mag instead of the crank trigger and did it start or not? 2....
Well that means the crank trigger is good, the mag and Electronics box is good and the rotor phasing is good. So looks like the Grid is bad. Do...
Yes you can plug the cranktrigger directly to the mag. Let me know what happens
Why don’t you try and start it using the mag trigger instead of the cranktrigger connected to the Grid. If it starts then that means the Grid and...
I think that is the first best thing to try. If the electronic boxes are rubber shock mounted then run a ground wire to each metal box cover on...
Don’t know if we talked about this or you have done it already. Have you tried disconnecting the crank trigger from the input and switched it to...
That is a real problem with failures in a crossover switch. I stopped hard mounting them and now attach them loosely with a zip tie to the front...
Then maybe try turning on a 40 jet right before to help with acceleration.
Are you running any lean outs?
I have used it with roots, screw and whipped blowers. The engine doesn’t know what is sitting on top
Yes, the calculation will be the same.
Yes with a crank trigger and moving the rotor phasing like you have done you have added safet and can safely add another 4*. Wouldn’t go any...
Well, 360* divided by 8 is 45*. So you have 45* between posts so if you divide that by 2 then the middle crossover Point is 22.5* max theoretical...
