Separate names with a comma.
nice car nice website so that magic 5 is within reach:D
good numbers Adam diddnt see where you said it was 8000, I had one of the first M5,s and tbh it realy wasnt that good, I dont mean it was...
My davenport modified K11 made 41.9 at 9050 rpm in top gear on a 6.31 227 with some pedaling (45 degree track temp) this a known logger its...
The troy critchley blower uses a chuck ford case and troys own rotors chuck ford blowers use a chuck ford case and troy critchley rotors...
i know if you buy a longer snout for a kobelko the longer snout includes a longer drive remove your drive and send it to him and get him to do the...
Hi Noel yes its become plain thet the push rods are longer that we were running befour You supplied these push rods to the engine builders spec...
ok i guess you are from reid machine and make the rocker arms, how much of a problem is it if there are a few threads showing above the nut 2...
Any opinions as to how much thread should show at the top of the nut on a brad 6 set up manton/read rocker arms? thanks guys
we run nitrogen in the tyres of our long haul trucks to stop them from getting hot and overheating...you like cold tyres??
any ideas whats best for a bew BAE /NRE combo pac 1355, Pac 1360 or the manley nextek and any preferences , pros or cons anyone had any issues...
yes there are a few ways that work starter on the midplate same location as a stock hemi thats what i have, killed 1 starter in two years and...
Iv had a hat ice up so bad during a warm up when someone forgot to unpack the de icer that the blades were actuly stuck with solid ice not a...
the early m5's were a modified kobelco case anyway it depends if you curently use a set back plate, as the m5 deal includes a 2" set back...
your more on the ball than i was, I dont know what i was thinking either:rolleyes: I was actuly thinking of lencodrives and CS1 modules
a CS2 wont bolt up to a Bruno drive unit, I have a CS2 in my pro mod, with a clutch and a 521 bae i tore up 1 sprag in two years fine spline...
Call terry vince at or Carl at ERD they have done some work in this direction very recently with interesting results that ended up with them not...
brownjs@shaw.ca
The ERD fuel systems are plumbed in this way, BV to hat dist block out of the hat block to the port block, look at www.erdengines.com and look at...
anyone got a number for them? thanks
As above the Lencodrive definatly will not work with CS1 trans you need a bruno drive unit, or there are others available, B&J ect
