Separate names with a comma.
I have an old set of downswepts that need retired, thought about cutting them up to build zoomies. How short is too short? What is the risk of...
Do you run 139 tooth? If not, you might call Mark at House of Payne. He can do a 24v deal, but I'm running his Big Dog on 18 volts and it spins...
Lsa and installed centerline? Looks like intensity numbers might be the same on intake and exhaust, wouldn't think that's great for a blower motor?
Not sure what you mean? I aborted the run after pedaling once. Since the run was aborted I clicked neutral, reached for the shutoff and felt the...
Always have the valve shut unless about ready to start it. I increased hat nozzle size to reduce fuel pressure, anyway the pump saver is set too...
I was thinking about this also. Except I would use a switch to deactivate the cylinder in the burnout.
Hard start Yes. The last two passes it was hard to start. I have 18v going to a big dog starter, so it spins pretty fast. It would...
Bearing and crank look great.
Was starting to get the combo sorted out on my bracket digger, 4.25@166 to the 1/8 at 12% over and pretty tame on fuel and timing. Then it...
Awesome, that's what I was expecting, hoped I was right. I've seen a few hundred nitrous plugs, but this blown alky deal has me a little gun shy....
No egts here, just my seat mounted accelerometer and a lot of spark plugs. I started out with all plugs having a little bit of brand new on the...
A little smarter Thanks for all of the help guys. On a side note, I did smoke the motor last night and find the oil leaks (distributor and front...
fuel pressure The only reason I wanted to run that much fuel pressure is because I have the cylinders pretty well even and was hoping to add fuel...
Sorry, just realized you said 1/4" for the fill ports. Im not sure about the 1/8 pipe near the 8 oclock snout bolt? Are you just using this to...
The oil coverage isn't substantial it's just a little bit everywhere. The oil level in the blower has dropped maybe 1/4 inch at the sight plug,...
Two separate questions. 1. I've been learning a tuneup using Spud's free calculator and reading plugs. Where I want to go next comes up at...
What kind of flex plate? If it is powder coated, sand/grind the coating off on both sides in the area of the crank hub. Maybe not your problem,...
