Separate names with a comma.
If I ran egts like yall are talking I'd have to change oil after the burnout. I'm five flats off stumble just to get the average barely under...
Since I stage at idle and go wot on the 2 step, 5 and 6 go cold to colder and take awhile to recover. I guess a bypass would help. How do I know...
1471 hhr littlefield bbc. Delta is centered on intake. Each side, from front to back, has 3 hat nozzles, 4th is plugged, nozzle in the blower,...
Junk-ass altronics red alert unit I bought off the classifieds. Not complaining about the purchase, just saying it's far from user friendly. I...
I would still use the plugs. I tuned my 2 stroke golf cart by making "hits" in the driveway and pulling the plug ;) So far, it looks like I...
Based on the way my plugs look after a warmup, I would not trust a reading after driving back to the pits. Besides, real t/d's get towed back:p
My 1471 enderle bbc uses 2.5 gallons on a 6.60 pass being towed up and back. That's with the bv set leaner than some but rich enough to keep the...
Can you post pics of your lifters? I'm only familiar with Chevy style blocks, but I can't figure out how you could get any oil flow without bands...
My NO! comment may have been misunderstanding what you were asking. I read "should I grind off the Whole side".
NO! I just used a small cuttoff wheel on a die grinder. My oil holes are ~3/16" above the oil band on the lifter. I just "brushed" the lifter...
I have notched he lifters on standard bbc motors to improve oil flow to the top. Just a little brush on the grinder that sort of chamfers the oil...
For what it's worth, my 7al2 keeps them lit through 8500 at 21 psi with .013 plug gap. I've got 6-8 runs on a set of plugs, but know guys that...
How about Motive? I'm not sure if they make any of the bigger stuff, but knock on wood, I've had good luck with my 9-inch 3.90. Although I'm not...
How long did you let the oven cleaner sit? I swear I remember 20 years ago just spraying it on and wiping it off. The last time I tried it,...
I know some say it matters, but I'm at 31 degrees with a 7al2 at 14 over making 20 psi on my 584. If you look at the qualifying sheet from this...
Worse track = more wheel speed; I would turn the power down farther. Checkmark the timing curve where the tire is standing up. Nothing wrong...
I have a pretty similar combo except 1.69 low gear. What is your base timing? I can go .990 60' with more timing pulled. When I've tried to go...
Seems like most cars I see do this are in trouble pretty early. Typical scenario is stick the tire, hop up, build a bunch of wheelspeed, carry it...
I get what you're saying Ron; I was wondering this myself a couple weeks ago. I've been using old nitrous plugs to warm mine up, ended up leaving...
Take that 2nd cam and add AT LEAST 6 degrees to the lobe separation and the exhaust duration. If you're more concerned with ET than boost...
