Separate names with a comma.
I don't think it's possible for a positive displacement pump with air as a working fluid to cavitate. Cavitation as I understand it is simply the...
Do launcher chutes use pilot chutes?
Are you using a known good timing light with no dials?
I would definitely check your Bv and idle poppet. For loose intake bolts, besides not detonating the motor, these are the best fix ever:...
584 14-71, .850, 286/312, 8000 rpm 15-1750 hp. NO GIRDLE ever for ~2.5 years. Harland Sharps, 250 on the seat, 3/8 .083 pushrods. No valvetrain...
Ya, i thought I was setup on a .46 or .47 and misjudged the air. Didn't hardly touch the bearings (maybe .001) but I still wouldn't want to try...
Andy doesn't like his blowers running slow, lol. I had one of the last 14s before the lb series came out, so a really good blower, and he...
Have you checked your poppets since the problem started? Every time mine starts surging I find that the idle poppet isn't seating fully. Clean it...
I'm only familiar with chevys, but if that cam was on a 116 or 117, I'd call it a great blower cam. I doubt you'd see much difference getting it...
I'm no expert, but don't think a .001 cut needs any post hardening??
Kings tend to have a 1/2 thou extra oil clearance for the same size bearing. Otherwise, it needs to come off the crank. No big deal at the...
Run whichever hat looks better, it won't Ffect performance between those two choices. I run the same pump and similar nozzle and pill sizes with...
Those clearances are my targets also. How much power and how many passes before you change or see squish/tension loss?
I got a little Leary of king a couple years ago but didn't find anything better so that's what I run now (~1800 hp BBC with sbc rod journals). I...
I have often idled at well over 800 on a couple cylinders. If it idles long enough, these will hit low 900s. I was Tuliping stainless exhaust...
I didn't think anybody had built a competition blower in the last 20 years with an open bottom?? Just because it makes more boost doesn't mean...
I've run high 30s roots Mfi dry for a few dozen passes. I prefer a solid gasket with some water sitting in the heads. I torched a head once when...
I made my own. One of the best bangs for the buck, including my time invested, that I've ever done. I wanted a higher windshield to get me out...
No data on either car at the time. I was told it had made high 30s previously. I would say if it did it was making a bunch of heat.
I helped with a car that had an scs 14-71 and ended up borrowing it for a pass. The first car went 6.59 @ maybe 205. Bolted on a superman and...
