Separate names with a comma.
JMatt --- if you tested your lines properly you would have seen a hairline crack in the tube fittings - how did you test them ? I am also...
9 gal pump is alot of fuel volume for what you are doing and the cubic inches--- I'd say it's fat at the end of the track ----- you don't give...
You need to qualify what stroke , CR. you are thinking about ---- you can go from 1.550 to 1.950 ------------------- depending on stroke -----------;)
No to the filling the rotors question---- next question is , are the inlet and outlet spacings, pattern exactly the same ? To me it is finding...
It must be Ti and 1.094 then ? 3.300 long ?
How about describing the way your pump is mounted and driven --- have you verified that it is still being driven properly by the cam spud or...
Is that pin weight correct ?
You don't say what mag your are running ????? I would agree with the thought you have enough lead in it --- look for something else to tweak a...
What style cylinder head do you have now ? 23 degree, 12 degree ? Combustion chamber CC's ?
Just throwing ideas out there--- can a ground problem cause this ?
Brandon, wouldn't you have to include in any RT study that fact that everybody stages at different places in the beams ? Some guys are...
Is there such a thing online anywhere ? Say for the divisional at Infineon this weekend ? Thanks
Mike , the plug can show something that happened faster than the sample rate of the EGT--- and just by looking at the plug you can't say when it...
One thing about EGT readings I see nobody comparing is, where the EGT is located in the header-- what depth the probe is protruding into the pipe,...
The guys I know that run the 6-71's two lobe end up turning them faster than the previous 3 lobe blowers they were running ------Blown Alky ---
You said a mouthful and capped it off !!!! Amen Will
Why water cooled ?
This guy Walt is now currently making the Western Wrist Pin---- Walt, great guy to deal with , http://www.aaprecisioncnc.com/services.html
BAE isn't going to know if your block registers have been bored for a larger OD sleeve than it was originally sold as ------------measure your...
It depends on what sleeve your block accepts now , is it a 1017 or a 1018 ? Darton part numbers--- If you go to Dartons website it has a...
