Separate names with a comma.
Found out our 15 year old coil was junk. New coil,points and condenser. Along with that and a few other bits of info gathered from this site i...
Greg, That's what we've been doing ever since we built the car except we were using gas. We sent the mag and coil out for service and will start...
After talking to the mag guy ( BR Motorsports ) he said 20 may be a bit wide also so we will make a change there. What would be a minimum gap...
Plug gap is 20. Mag is Mallory 3.When we get the mag back we will try some different starting combos at the shop. Most guys i have talked to say...
Thanks, thought that might be a problem also so the mag and coil went out for service today.
We usually fire the car before towing up but had run about 1 hour earlier so we felt there was still enough heat in to not have to warm it up. We...
Flooded our car for the first time in 13 years last weekend just in time for first round. normal procedure is pull the car up,driver pulls fuel...
Been using them in our blown sbc for a few years with no problems. Usally good for 2 seasons on mains and rods. I have herd the same thing about...
You can here it from the puke tank vent. Traveling through the burn doun tubes to the tank and out the vent. Been the same for 11 years running...
That is after 25-30 passes.
acceptable leak down We cant seem to do any better that 10-15% on new build. Molly rings or gapless makes no diff. Pistons are installed dry with...
Scroll untill you get to the altitude reading and you can adjust up or down by pressing the center button then up or down button as needed. Check...
I check to make sure the track elevation is reads correct. If not you can adjust accordingly on the 4250 and then take your readings.
Ditto what Ron C said. We had to chuck are's up in the lathe and cut a step.
another nice piece is Summers Brothers.
Thanks for the responce. Block is already back from machine shop with 400 finish. We'll use the plasma-moly rings as we have in the past but would...
anyone no if the final bore finish the same for hell fire as moly.
Yes,Are you? If so,come buy and say hello. We haven't blown the covers off YET but have come real close. Just a mater of time i suppose.
Greg,Guess we'll not be pitting next to you any more.ha ha.
Were just trying to keep up with some others in the class. we nromally are 173-175 and some are 180 plus in a 7.60 index class. We are also a...
