Separate names with a comma.
I think temperature was it. I called Robert (operators were indeed standing by), and he suggested putting a salamander heater pointing at it...
Another potential explanation? I turned the engine over slowly while I was priming. At one point, the oil started to well our of the...
New crank, rods, valvesprings. Same cam, cam bearings, head gaskets, etc... Bill Naves sent me a PM and said it might just be that the cam holes...
Just got ready to fire my hemi after a winter long rebuild. While priming the oil system, I get good pressure at the gauge, which is mounted at...
Yep. Got the stuff yesterday. The tool to hold the crank worked perfectly. I was able to torque the crank bolt easy as can be. The feature to...
Been there, done that, bought the T-shirt. Brand new aluminum 427 side-oiler ford. Best of the best parts. I had primed the oil system BEFORE...
Thanks guys. Hopefully I'll get 'er started tomorrow evening in the shop and start checking and adjusting everything. About all I've got left is...
Hemi with angled idler. First time setting the belt tension. How is it done? Thanks for any help. -Brian
Maybe I misunderstood ProMod63's post. I though he was taking a playful shot at Mike Canter as a Ford guy (jealousy for sure), and paying respect...
Still wiring the dragster, almost done now. I got my points box wired to the coil, and also to the cable kill switch. I decided it would be good...
I was afraid of that. Since the boxes are fairly close together by necessity (the rev limit cord isn't that long), the routing options tend to be...
Does the shielded trigger wire need to be kept away from the two wires that run from the points box to the coil, or does the shielding protect it?...
How true. Most sites only give you 2 cents worth. Much better deal here! :D
I do events. Everyone I know personally does events. -Brian
I'm pretty sure you have it right. That's the way I intend to run it. Dave Lowe over at Secondwind racing gave me a diagram that has three...
It's 18" long too! :eek: -Brian
Will do. -Brian
Thanks guys. Don't have room for the nuts on the backside, but I'll do the rest. I think I have some chamfered washers somewhere (probably...
Is it typical to put washers under the bolt heads that hold the torque converter to the flexplate? Are the bolts something specific, or can I...
Thanks BigB, I went to System 1 website, and it shows the center fitting on the remote mount being the return to the pump, so I had that part...
