Separate names with a comma.
not sure if the rotors are the same, I know the front opening is not as open (large) on a B as a D- in front of the rotors. no burst panel on a B...
Terrible news, I bought a blower from her a while back and was a pleasure to deal with.
Wesley Jones from mississippi runs a D on a big chief Dwayne Watkins from tennesse also theres quite a few on 481x motors including myself
I could be wrong, but I think the first ones were cast rotors? I only heard of rotor failure when a driveline component broke and oversped the...
All I see in the video is a couple cylinders flaring some fuel. One video it does it before the tire makes a complete revolution. looking at...
I've run the two wheel and a single, prefer the single for weight. Has more room in the trailer and one less wheel to adjust height on!
I converted my pro mod 481x to wet sump, using the same dry sump Olson pan,a P&P-RCD wet sump pump and 15 qts of oil. I noticed oil pressure...
Are the rotors ever balanced to begin with?
Rick at AJPE tole me the rods they were going to make were the deep cycle rods
I did it for a couple years on a Littlefield 14 helix, cast cover with a 6.5 in snout turning 40 over. Never had an issue with pully, bearing,...
You can run the two speed, thats the way I have mine now. and doesnt have to have a lockup. or put a 4.56 rear in it.
I went with the deist,Good Vibrations had a good price on em. Thanks for the replies
whats the best manufacturer for 3.3/20 gloves???
Cant remember who makes it, but there was an upright drive (similar to summers bros and the pioneer) but went on the end of the fuel pump...
I'd forget about the 50 degrees and read the plugs
Pull the heads on the 481x the same. Except the header has to come off. A one piece rocker stand (easy) the intake stays in place.
Myself I like the 481x because it's so easy to work on, everything fits when you buy it,and has no valvetrain-rocker-pushrod problems. It may be a...
Mine would start with a fresh charge 16 volt turbo start on the trigger, after a crank or two no go-back to the mag,
I think the Milwaukee battery cant be any more than like 3-4 lbs
The 481x has plenty of return area in the heads, But the valley may be the restriction. My block has 7 holes, less than .500 diameter, as it came...
