Separate names with a comma.
I am running Goodyear 17x33 D4 compound. I run 5 3/4 lb tire pressure in them.
What you say makes sense. They got that high because i kept moving them up thinking that up correlated to softer hit on the bars. I guess that...
swapped rotors Thanks for the input. I serviced the blower and obviously installed the rotors wrong. I didnt think that they looked right...
Hi Everyone, I have a 1965 Plymouth Belvedere 114 inch wheel base. about 2600 lbs 572 Blown Alcohol Hemi 28 lbs boost. Powerglide with Neil...
Thanks for the reply. I thought that might be the problem but wanted to ask before i tore the hole thing apart again. ken
Hi, I just put new teflon strips in the blower reassembled it started the car an alcohol is shooting out of the injectors that are located at the...
I have been absent. Thanks for the replies I am going to be taking the Blower off the engine and will then disassemble the blower to see what...
I spoke with JR at RBS Superchargers Hey Mike, I spoke with JR at rbs superchargers. He said that the lube can cause the teflon to swell....
Thanks for the input Mike. I do you Prizm, at least i think i do. I am using a PTFE which i think is Prizm. Purchased from RBS Superchargers. But...
Hi, I have a Blown Alcohol 527 ci Hemi which resides in a 1965 Plymouth Belvedere. So I was busy and couldnt go racing for several months ok 5...
I put another flat into the barrel valve at the track and checked it when i got the car back to the shop and leakdown was 42%. Do think i just...
Hi, I am running a blown alcohol 572 CI Hemi water block and heads. Running it with water radiator and water pump. I was running the engine...
reply to mike so here is what i am going to do. 6 inches off the ground on the wheelie bars, 150 lb springs tighten up the rebound and...
Will Thanks for the advice. I will take the pedal stop off and rely on the string.
reply to rick Rick, I was thinking of taking the converter down to around 4000 stall. what kind of stall did you guys have in your...
reply to mike 2 Also i have no idea what kind of power the engine is making as i have not dynoed it. My Machinest thinks it is probably...
reply to mike Dont know if they are top fuel heads but they are 170 cc chambers and if i remember correctly 2.45" intake and 1.95 exhaust...
Forgot to answer the head question I have Stage 5 Millenium heads on the engine.
Reply to Randy G. Randy given that i am a neophyte in this game I am probably about to ask a question that will leave you wondering what the...
relpy to Mike I will order some heavier rear springs. I measured all of the locations of the brackets and holes and then put them into a 4...
