Separate names with a comma.
Are any of you guys using a pump to fill your bottles?
I am running a sprintmag II, it was just serviced at FEI. I will narrow my plug gap up a little bit and change to a cooler plug. Thanks for...
Maybe my problems are due to my plugs. I removed them and they dont look all the bad (to a gas guy) but did notice a few of them with some...
I will try some new plugs and see if it makes a difference in how it runs. How often do most top alcohol guys change their plugs?
The spark plugs probably have a little more than an hour of run time on them, and look good in my opinion. The plug wires are less than a week...
I am sure it was not too fat, the oil looks perfect and I did not see any fuel coming out of the zoomies. The elevation at home is 1362 and the...
I am fairly new to blown alcohol. On Thursday night I went and test ran my boat on a local lake. It ran super and made a ton of power. I made...
What does all of this mean?
I am not getting much oil in the puke tank. I was getting some "steam", if you want to call it that. I think it was because I had the barrel...
I have been trying to get my SBC in my boat tuned properly. 406, littlefield 6-71 delta bottom, 21 percent over with a buzzard catcher and...
Thank you.
Can I just remove the fuel inlet line to the fuel pump, fill it with MMO and crank the engine over to fill all the lines? Is there an easy method...
Nobody can tell me the proper way to store my engines fuel system after running it? I really need some help here.
I am sure this has been beat to death on here. I did a search and could not find what I was looking for. What is the best thing to do to an...
What are your thoughts on running a gasket with scree in it to keep debris from entering the blower? I ran one on my last blown carb engine.
I have changed over from Ethanol to Methanol and am curious about engine oil. Can I still use the same engine oil as I was using with the...
I am not sure where you got the idea that I was looking for a "free" tune. Thanks for the above replies, I was able to get in touch with...
I recently purchased a 6-71 littlefield delta stripped blower with a Enderle buzzard catcher, valves, lines, ect. This will be going on my 406 ci...
