Separate names with a comma.
please ask them if they have any used MSD-10+'s for sale when you talk to them !! Note there is a MSD-10 and coupler for sale on Ebay. Cheers Graham
Hi there, it sounds like its your coupler but I am not familiar with them so cant comment on how to test them. It it couples 2 coils, you should...
fair comment !! fyi, it is unusual for a coil to go high resistance, they will normally go open circuit (ie: dead) or can suffer from 'shortened...
Hi guys, there are 2 readings that are important. The first is taken from the ground terminal to the primary positive terminal, this will be a low...
Hi rawolton, do you have standard BB Chevy bore spacing in your beast?
I have also been advised that O rings are an issue at 4.6, you may be better of using the multi layer gaskets rather than copper (Cometic's are...
we have used the same Redline diff oil for 6 years, must take the head out and have a look one day.... (1600HP Chevy, 1500kg car)
it would need to be 4 wheel drive and have off road shocks to be used at our tracks in New Zealand !!
charging alarm battery Hi all, it really depends on how much power you are consuming and the capacity of your charger. If you used say a 7aH...
your next issue will be lack of spark, I would be suprised if a 7 could burn it once you get it running right. As MSD dont make a 10 anymore you...
Battery Your best bet is probably to buy a small 5 or 7 aH (amp hour) battery designed for a domestic alarm system. These are rectangular with...
we use #4, a mix of teflon and conventional braided hose
get a multi meter and set it to "ohms", short the 2 leads together and it should read zero ohms. Then put a lead on each end of the wire you are...
Hi Jim, I was hoping no one would ask me that as I am running a cheap RCD (I think) version which cost about US$150 3 years ago !! We dont do a...
Hi all, whats the recommendation for a blown Alky BB Chevy for driving the cam? I dont want to go to a belt drive due to the high cost so am...
thanks very much for the recommendations guys, I have plenty to work with. Happy racing
Hi guys, I am trying to find a cost effective piston supplier for my drag car. Its only going to put out say 2,000 BHP (MAX), its a Merlin iron...
No spark you cant test the crank trigger by using an ohm meter but you can test the 7al2 by shorting the points wire to ground and you should get...
BB Chev timing we run a 509 with a 50% over 10-71, Dart 360 heads, fairly mild at 11:1 , we have gone from 28 to 31 and it loves it....
BB Chev low oil pressure Maybe they forgot to bolt the pump in.... we run a billet Moroso wet pump and maintain 70'ish psi hot with 50 weight...
