Separate names with a comma.
why not get an MSD-8+ as its the gruntiest non mag ignition available. Or buy by refurbished MSD-10+ and coil for $800 ! Cheers, Graham
thanks guys, we are a husband and wife team trying to run with no sponsorship so swapping the manifold is not an option ! I will look at modifying...
Hi all, I am installing an SSI hi helix 10-71 on a BB Chevy running conventional heads and a BDS manifold. Should I be looking at relocating the...
thanks very much guys, I forgot to mention that these are standerd BB Chevy diam and so is the cam. Happy racing !
Hi all, whats the best value lifters (ie: not the most expensive) that would be suitable for a modest blown BB Chevy, say 2,000 HP 8,000 rpm. The...
we run .010 endplay on a BB Chevy
Hi all, who has a cost effective program for setting up a fuel system on a blown Alky BB Chev?? Thanks, Graham
we are running a 509 with conventional heads, 10-71 producing 29 psi boost and 32 degrees timing. MSD-10+ ignition, we had a similar situation and...
Innovative Electronics, get a DL32 and 2 x 4 way EGT adaptors. Then buy the EGT probes off Ebay for $20 each. This is what we have done and it...
sorry forgot to add that you have to have the anodised pulleys with the GT belts
yes and it was caused by a slight out of alignment issue with the top, bottom and idler pulley. It dosent take much to cause it.
Although we run a T400 we use and external cooler with a bypass valve so the cooler only works when the temp goes over 180 deg. It helps to get...
BB Chev plugs we use the NGK 5671-10's and have never had a problem, they are cheap to. Cheers Graham
good point Mike, the cheap ones I brought from ebay appear to be 1 piece sealed stainless and I could not see any filling at the end like my old...
EGT senders we just brought a set of 8 from Ebay for US$20 each, they appear to work fine, initially I compared them to the old racepak units...
Plugs Hi Mike, the B10ES must be a resister plug if its 10.2 ohms, is it normal to use resister plugs in this application? The other measurement...
BB Chev pan we are just using a hamburger pan with no issues for over 5 years. I think its about 8 litres. We normally loose pressure when we...
153 tooth flexplate it will turn over faster and start easier if you are running a mag ( as long as the starter can turn it)
msd-10+ PM sent, Cheers
MSD have advised me that you need specialised test equipment to test the coil coupler for the 10, as I said there is a unit for sale on Ebay....
