Separate names with a comma.
interference I assume you are running the MSD spiral plug leads as recommended by MSD and not any non spiral versions.
intereference Hi again, I dont know much about the promag 44's as I have always run an MSD 10+ but I do understand interference. Another thing to...
pickup concerns I would put money on it (your money of course...) not being the trigger, if your wires are only 3" away you need to seperate...
pickup shielding the wires on the MSD triggers are twisted together to cancel or reduce the impact that radiation from plug wires has on it. The...
reply to SoDaks questions carbon core is NOT MSD spiral wires and I would be suprised if it would live for long, it will probably burn up in no...
leaking popett I think Dragparts.com sell individual items for these if you dont want to but a complete assembly.
plug gap remember that it takes volts to jump a gap and current to maintain the spark. The MSD 7's, 8's and 10's have high voltage but less...
wet sump for me Blown BB Chevy, HH SSI 10-71, 8000rpm. If money was no object then I would look at a dry sump option. However, we are a self...
Merlin 3 we ran a Merlin 3 block for over 5 years at up to 30psi with no problems.
24v or greater starters Hi all, if it makes it easier, you could always use a 24v truck solenoid rather than the 12v one supplied with the...
Hi all, I have some spare inputs on my data logger and am wondering where the best point is to measure fuel pump pressure is and also if there is...
we have busted belts when we have had them too tight. We now check them once they are at running temperature.
yes thats exactly what we have done with our engine. We used to run the loop on the pump itself but I have been advised that this is a better...
R=R rods, as advertised on this site. Great quality and fair price
agreed, we plumbed a small Carter fuel pump into the hat distribution block via a #6 check valve and it works perfect every time.
1.63 divided by 1.47 = 1.1088% or 10.88% more air
we have a cheap tool from Summit Racing that we have used with the heads on. You just fill the cylinder with air and that holds the valve shut....
my feeling is NO, even based on good old Smokeys formula of 10psi/ 1000rpm its not enough. Depending on the oil and clearances it may not be...
There has been previous posts re power output of mags etc, a Promag44 is by far the highest output at 900mJ, the second is a MSD-10+ at 700mJ, the...
its one that I had as a spare and was just returned from MSD direct
