Separate names with a comma.
I've been told that the Santhuff shocks have a problem with the oil foaming during tire shake and losing control. I dont know, I cant afford them...
You can get a Mega series converter from Coan with a Turbo spline input shaft so you dont necessarily have to have the big input shaft.
If its hitting the wheelie bars too hard chances are the IC is too long. Try a short (45 in or less) IC around 6 1/2 up, there are probably many...
I ran a bruno and I liked it pretty well. They are easy to work on when you have to. I really liked the fact that I could take the trans (lenco)...
Call Brooks @ 714-778-3315 they will fax you a spec sheet that has the torque values and process on it, they suggest torquing with a certain...
Define "violent". Too much wheel speed? Too much wheel stand? Do you have a computer on the car? What type of chassis do you have, double frame...
Dont forget Howard Moon, he's on the east coast also.
Rod Fuller had a good point actually, he said he could go SC racing for $500. I'm sure that meant $500 of his OWN money since that big Valvoline...
I ran a Bruno/Lenco setup, with a PTC converter and would see around 20% or more slippage. Lorenzo, I think your issue is in the converter, not...
Travis, You guys are running a Bruno right? Shoot me an e-mail jason_green@standardaero.com I have info for Bruno/Lenco's and info from last...
Depending on the rules you guys have to use I've set up my Pro Mod this way: I bought a SMALL 12v battery from Odyssey, weighs around 15lbs and...
Usually with a new set of tires we will over inflate them to 20-30 psi and leave them in the sun for a while. This seems to even the tires out...
yeah the sprags became an issue with our Coan converters too. We were able to get 30 runs on the first one, then 3 on the next then 4 on the...
Mick Snyder is using a Coan converter in his alky funny car. I ran a nitrous PM car last year with Coan Converter and trans. I have since...
Im in the same predicament. Tim Mcamis makes a Hemi Mid plate that is machined, drilled and tapped for a starter. You have to buy an adapter...
I know from running my NOS motor a vacum pump and a pan vac sensor on the race pak made us aware of many problems before they became an issue....
Anyone used the Crane "Posi-Stop" retainers and locks?
Just wanted to know what type of retainers and lash caps most alky hemi folks are using. Im trying to find a cap with a .110 skirt for an 11/32...
Moroso calls it a "dry sump" pan but according to them (yes we checked) it can be used in either application. I've been told to use 12-13 qts of...
I have 2 cast KB oil pumps with dual #12 inlets, both for wet sump, they are for sale. Call me @ 865-806-9241
