Separate names with a comma.
This is what I use. They also have preformed 90s in this hose but I found a 1.250 aluminum 90* online and used this hose to connect to the pump...
With base timing is 28*. I phased the rotor and 23* and pulled 15* last weekend without any problems. Map had all the timing in around 2.2 secs...
Dang you just can't catch a break ...
My big concern was with the crab cap because it is so small. Yea I have a crank trigger. I know someone who knock 15* out this past weekend but...
Blown BBC TD application. Using a small crab distributor cap how much timing do you think can be pulled before I start having cross fire or other...
LIKE !!
And I thought I was having a bad day with pulled rocker stand bolts
I am making 24-28lbs depending on air with a TBS 14/71 XR1 at 14% on a 540 BBC. XR1 is a very efficient blower
Is spraying blower lube in really that important? I have a 15 inch tall JBR carbon hat and the opening is primarily toward the front. Opening the...
Shifting around 8300 thru the traps at about 8000. Will, As far as pulling the studs out on a BBC, I dont think its as much a weight thing as it...
Im pretty new to running blower but the Star Racer 8mm belt on my TD has 35 runs on it, 2 step launch and ripping the throttle on top end and belt...
Blown BBC 25-30LBS of boost with XR1 blower in TD. Currently have Ti intakes and SS exhaust valves. Would it be worth the money to make the switch...
Does total intake manifold volume affect boost? Say boost with a given pulley is 30lbs, how would that be affected by changing the intake manifold...
Thanks Mike I appreciate it
Mike this is how my flow meter is plumbed, about 6 inches #10 into flow meter then a #10 union then a Automan Wye down to #8. Do see any issue...
A question I have is how do you know what the pressure is at idle between the BV and distribution block? I have a sensor at the pump reading about...
27* currently
As far as the pulleys got a 54 on bottom and currently have a 50 on top which is 8% just to get started and the fastest pulley I have is 46 which...
Thanks Will for taking the time to make such an informative post. The push fittings is a great idea, in fact Steve Jr wants to install a metering...
Neil, are you having any surging issues with the XR1? I just got mine started up and i'm having surge issues, I know Brian Bednar has been...
