Separate names with a comma.
probes try switching it with another cylinder and see if the problem stays with the cylinder or follows the probe.
broken lifters It is very possible to bounce the lifter on the lobe if the "harmonic" is right, that all depends on the grind of the cam, the...
oops Just looked at the video, I agree it isn't spinning.
Lakeland Dragstrip Try another track, I don't want to rag on a track but.....it looks like they are useing highway barriers for the wall, I went...
How did I do that? This is bad.....I can not seem to figure out how I did that.....but obviously I did....old age creeping up on me I guess!
Jr dragster I changed mine to my car number.
Blown SBC Second wind, Did you just have head issues or did you have bottom end woes also?, How hard did you push it to run 6.40's? Thanks
Yuk Nope, I am not going to taste it!
Mmo You can find it at any Walmart, or auto parts store. Red plastic bottle with black writing, works great on air tools also!
SBC probs Hi what does your pump flow? Mine flows 6.5 @ 4000 I run 56 nozzles 50 main, egts are only 700-900 at idle, I am running an 8-71 @ 8%...
Blown SBC Hi Rick, I am running a Blown SBC in T/D for a year and a half now. I am sneaking up on it, so far the only problem I have had is head...
I am running just hat nozzles right now(Enderle Bird Catcher) on my SBC, I am going to add port nozzles, any suggestions on who's to run in...
epoxy I have used this also, I could only purchase it by the gallon, much more expensive, works well though, I would still use screen if you are...
epoxy My heads have epoxy in two runners(same runner each head, core shift, issue, .5 inch by 1inch long) and I use JB weld and a very fine...
Plugs I run R5671-11 with MSD 7-AL2 .020 gap, 11.7 to 1, 8-71 standard helix, 8% over 19-23 lbs of boost, no misfires and no problems, runs...
Pop check your personals.
Why don't you call Erson and ask them what they think?
Josh, What type of car do you run the SBC in and what kind of luck have you had with the cylinder heads staying sealed between the center...
Call Stroud. They are great people to deal with.
Cmd Very trick work! Have you leaked your motor? I am o-ring'ed with copper head gaskets, only running 26 degrees with msd 7al2 car runs 6.70's...
