Separate names with a comma.
Sbc The last post is correct, with one addition, depending on the power output with a "standard" type block (little M, Bowtie, ect.) when you...
Sbc My motor pulled main web number 2 out.....I have problems with the deck cracking when there is a sleeve installed but not until, I also fill...
EGT's I tune off the plugs, when they are correct then I make note of the egt's. Henry
tie-in her down I have a piece of wood that just fits under the car with 7 lbs air in the tires and a block that slides under the rear end then...
wing angle make sure the car is on level ground! on my car the top of the cage is close to parrallel with the ground when tires are set so I...
oils The last post is correct, I was eating lifter bores Mr. Crower set me straight on oils, changed brand and the problems dissappered! For the...
plugs Thanks I will do that. Henry
speaking of plugs... what is the disadvantage of running as cold a plug as the ignition can light? Not saying the -10 is wrong just a "food for...
Rbs I have ordered several items from RBS only had one problem with a product not them.....and they made it right, they are a pleasure to deal...
Synthetics I mentioned the amsoil, I have used it since 1984 and have had great luck with it, seals do not harden and absolutly (sic) no residue...
synthetics I have always used amsoil in the rear with good luck, after I saw this post I looked in it....the gears don't look as spiffy as they...
13" wheels Do you still have any good 13" wheels....anyone else have some that are not dry rotted?
Pen Grade 1 Yeah I have been using th nitro 70 all year and the system one looks great but just making sure....thanks. I will pull the motor...
Pen Grade 1 I was told the Pen Grade 1 nitro 70 has the zinc still in it also, this is correct? anyone know? Thanks
Blown SBC It takes me about 40 minutes to get mine cooled down for another run and I run water through the heads. Made seven runs at the world...
Sbc You will need to run a crank support at the bare minimum, I use a callies hardened crank with the stock snout but with a crank support, it...
SBC 393ci Brad, Should not be a problem, mine is in a dragster 8% over 8-71 standard helix 1800lbs 6.615 @ 202.24 last weekent at World Finals...
Sbc I run a SBC in T/D IHRA and am #17 qualifier this weekend at the world finals, I run a filled (to the top)bowtie block with splayed billet...
neat SBC How much blower did you run and what overdrive? Thanks
Has anyone ever tried to use a clutchless trans ie: Liberty behind a Bruno or Lenco drive? These transmissions are slightly more efficient but...
