Separate names with a comma.
Hey guys had some issues dropping engine rpm. We changed coil, points box, grid, crank trigger, efi box, battery, plugs no luck. We think maybe...
It definately makes a differance we did these a few years back and i can tell you it made a differance. I am not sure how others do it or have...
Moran never went 5.99 @ 3000lbs he did go 5.99 @ 2650-2700lb though. Steve Summers has been 5.87 @ 257 with a bruno liberty and it has been...
Is the noonan chamber the same as a brad 8 chamber? I am wondering if we can get pistons and rods from Brad and then assemble with noonan heads...
It has yet to start on mag trigger only bs3 trigger at first I thought phase was way off so I rigged up a switch started off of bs3 then switched...
Spoke to MSD they say you need 180 rpm minimum and also stated I should see spark at 275rpm with no plugs. Funny thing is I have had 4 cars with...
Its all brand new stuff but im sure anything is possible. Thanks for the input.
Hoping you guys can help me out. We have a new combo twin turbo BAE hemi BS3 ecu pro mag 44 points box w rev limiter and power grid. I got the...
I originally thought it was a bad injector. I have sent all inj backs to the supplier and all checked out ok, they say. The thing that had me...
Yes other combo had the same parts. Yes I set timing to 25 with mag plugged into itself verify with timing light, then plug the BS3 trigger wire...
Prior combo was very similer to this one with slighty less compression. Car went .989 2.62 3.93 @ 197 cylinder 8 egt went through the roof at...
Guys the combo went 3.92 @ 197 on this pass and was do e at 3.40 into the run. How can you think its fuel when your egts are hotter and afr is...
Hi guys, I am having a little issue here First time out and down the track with a new combo, twin turbo BAE hemi efi. Ran the car about 500...
Any luck? We just have been having issues with a new set as well. We are sticking them at idle speed. I have pulled them and honed lifter bores...
Please take it from me the Cam FX are junk. I alos had a set with about 2 runs on them break the axle shaft and take out a brand new cam, bend a...
Wondering how the BAE 8X stacks up to the NRE head. I hear the exhaust port is the only real differance. In the market wondering which way to...
So whats all the hype over the NRE head? from what i understand it isnt really any different aside from the oiling. I am wanting to know...
Can anyone explain the differance. I have a Brad 8 Head right now 2.450 1.950 what is the benifit going to the NRE aside from oiling? Same...
You are hitting that car way too hard. I would recomend lower launch rpm or a stator convertor change. What is the .25 sec wheel speed?
wondering if broken rockers are common in the alcohol world. We run a Brad 8 with Brad Hi ratio rockers. We broke number 7 intake rocker in half....
