Separate names with a comma.
I was helping a friend yesterday that has been having some valve train issues. I am a little baffled to be honest. He has .519 lobe cam 1.78...
Anyone running Redline Heavy Duty Shock proof in the rear? We are running a 10" ring gear in a Strange Ultra looking to improve live span some....
Be careful with that, a lot of guys just went to flat faced valves on the high rpm blown alky stuff to keep the valve from tuliping. 126G is...
Im surprised no one has asked how far you are from coil bind? Valve lash does not hurt a valve spring. It will beat up the valve cap or tip and...
That's interesting I wonder why that is/was. I run 1/8 mile stuff so not worried about NHRA. Just trying to figure out if anyone had any...
How do these 2 compare we have run the 17/34.5 for the past 3 years was looking at trying the 17/36. I am hoping we can get more aggressive with...
150deg on most all runs
Im at 4100 at 1 second, I will have to pull my data to look at 1.5seconds those numbers don't stick in my head like the .5 .75 and 1 do!:D
5 runs just tried a set of liners also to see if they would help over the beadlock.
I got a gasket a time or 2 and it was always a fuel issue. I got a head and block, piston was perfect plug wasn't burnt but bearing had a little...
I appreciate all the ideas and info the car 60's good and runs great till about 1.5 into the run that's where it wants to shake. I can make it...
Car has 1.24 low gear 5.00 rear gear now. I will try taking some pump out of the converter.
Thanks for the info guys. I will try to through more fuel at where it is too aggressive instead.
Ok so open valve later and it will close later killing so low end? I will try 25BTDC Thanks for the info guys
Wouldn't having the valve open earlier kill cylinder pressure thus reducing torque? I thought 30BTDC is later than 35BTDC which comes up first...
I am trying to get our timing curve in a little sooner. We have our cam in at 30BTDC now if we move it to 35 we should theoretically more the...
Thanks, I know they have a light version. I was told it is 12 -13lb lighter than the BAE block but Noonan has come out with a good copy of the...
Who has the lightest hemi block out there. BAE, TFX, NRE or CN?
How are guys reading the timing mark with the short ground strap? I know from Mike write up a 5671 type plug you can see timing mark start to turn...
I am running 54 & 8.5" high right now, trying to get timing in a little faster to get 330 numbers down but its knocking the tire loose around 1.25...
