Separate names with a comma.
hi guys the cars on this link really needs ur votes to help send them to the auto show in canada. please log on a vote thx for ur help...
The general rule of thumb is .080 on the intake and .100 on the exhaust. If you want to go tighter, you better make sure you have good valve...
thx sandracer, please explain. newbe at this.
hi do you have to balance the crank with metal, or can you do it with just drilling into the counter weights. running stroker with aluminum rods...
Hi can u take a older stage 3 wet block sleeve and use it in a dry block? Stage 4 or 5 thx
thx guys, what the difference with GRP and MGP, I know the price is a big difference?
hi who sells very good alum rods, also has them for a good price. need them for a blown 1600 hp, hemi mains and 2.2 chevy rod journal size, 7.20...
hi would a bj reveser with corse spline bolt up to a older lenco 3 speed with course spline? and work with no problems.
thx dave, heard that I could from another racer, but just wanted to check. max rpm would be 7500.
hi can anybody tell me what the max rod side clearance is. going blown 1200 to 1400 hp, rods are .980 and journals are 2.050 and radiused. also...
thx still need pistons for this set up 4.320 bore. old TAD block
sorry for the vagueness on my motor combo, but I dont have much infor for you, just its a short deck with 3.750, veney older fuel heads. think 170...
hi wanted to know what rod lenght do I need for my engine. kb short deck block, crank 3.750 stroke, 4.310 bore, using older veney fuel heads for...
hey prospect, I know doug doucette of doucette racing in winnipeg has a cool set up. he runs that type but has his dual mags running of it too....
hey william did you check this combo out, hope this fits your budget.
cheap as you can go Default Re: Cheap Blown Alky BBC This if from an article I found a while back.... Should give you all the info you need....
how many thou clearance should there be for alum block and how much for a steel block, both 426 hemi. does a blower motor need more clearance in...
hi can anybody tell me the piston comp heights for these set ups. std block 170 cc head, first using a stock stroke crank whats the comp height...
tried their old number, but it is disconnected. anybody have their new number by chance. sent my crank for repair. thx
hi wanted to know if you need special pistons for these heads, veney older serial 535s. block is std deck kb stge 4. needing to get around 10 to1...
